4x4mike
09-19-2012, 09:42 AM
Up for sale are my USED Hella Micro DE fog lights that have been converted to HID using a 35 watt DDM kit. The lights were purchased from yellowandbluelighting.com. Here is a link to the lights: http://yellowandbluelighting.com/hella-micro-de-fog-lamp-kit-74527.html
Here is the DDM kit: http://www.ddmtuning.com/Products/DDM-HID-Kit-Slim-Ballast-35W-or-55W
The lights come with brackets that fit the 3rd gen bumpers that have the fog light holes. If your model didn't come with the fog lights you have to cut out the factory hole them mount the brackets using factory bumper hardware. I'll also include 3000K bulbs as well as 4500k bulbs.
The lights do not come with a switch or any wiring other than the HID wiring. You'll need to have switched power and wire to the lights. Some models have factory wiring within the harness so you'll have to check. If that is the case you need to tap the circuit, add a switch and mount up the lights.
Here are some pictures of the lights when they were brand new and prior to installation.
https://lh3.googleusercontent.com/-m10X83p121o/T0wBsXFpD5I/AAAAAAAAsjM/DwKjAw3Pjdo/s640/DSC07796.jpg
https://lh4.googleusercontent.com/-bYe0hSwdA9s/T0wBsd9SKYI/AAAAAAAAsjU/-ztzQY_VaBw/s640/DSC07797.jpg
https://lh3.googleusercontent.com/-nb8YKGCKopM/T0wBtCO-NiI/AAAAAAAAsjs/k2bG-MCW57k/s640/DSC07800.jpg
https://lh3.googleusercontent.com/-qVKnMHava7Y/T0wBtpCgK-I/AAAAAAAAskQ/XronyP66Gbc/s640/DSC07804.jpg
Here you can see the different bulbs. 3000k bulbs are currently installed. Installing the 4500k bulbs require trimming some RTV to remove the wiring from the rubber back cap. After installing the 4500K bulbs new RTV would need to be applied. https://lh3.googleusercontent.com/-1yJ8850LX74/Tvn70bIQeeI/AAAAAAAArF4/Mp3f0dWf87U/s640/IMAG0542.jpg
The lights are located in 95628 and the price is $120. Buyer pays shipping. I can bring these to Pismo September 28-30 for interested buys.
Here is the DDM kit: http://www.ddmtuning.com/Products/DDM-HID-Kit-Slim-Ballast-35W-or-55W
The lights come with brackets that fit the 3rd gen bumpers that have the fog light holes. If your model didn't come with the fog lights you have to cut out the factory hole them mount the brackets using factory bumper hardware. I'll also include 3000K bulbs as well as 4500k bulbs.
The lights do not come with a switch or any wiring other than the HID wiring. You'll need to have switched power and wire to the lights. Some models have factory wiring within the harness so you'll have to check. If that is the case you need to tap the circuit, add a switch and mount up the lights.
Here are some pictures of the lights when they were brand new and prior to installation.
https://lh3.googleusercontent.com/-m10X83p121o/T0wBsXFpD5I/AAAAAAAAsjM/DwKjAw3Pjdo/s640/DSC07796.jpg
https://lh4.googleusercontent.com/-bYe0hSwdA9s/T0wBsd9SKYI/AAAAAAAAsjU/-ztzQY_VaBw/s640/DSC07797.jpg
https://lh3.googleusercontent.com/-nb8YKGCKopM/T0wBtCO-NiI/AAAAAAAAsjs/k2bG-MCW57k/s640/DSC07800.jpg
https://lh3.googleusercontent.com/-qVKnMHava7Y/T0wBtpCgK-I/AAAAAAAAskQ/XronyP66Gbc/s640/DSC07804.jpg
Here you can see the different bulbs. 3000k bulbs are currently installed. Installing the 4500k bulbs require trimming some RTV to remove the wiring from the rubber back cap. After installing the 4500K bulbs new RTV would need to be applied. https://lh3.googleusercontent.com/-1yJ8850LX74/Tvn70bIQeeI/AAAAAAAArF4/Mp3f0dWf87U/s640/IMAG0542.jpg
The lights are located in 95628 and the price is $120. Buyer pays shipping. I can bring these to Pismo September 28-30 for interested buys.