PDA

View Full Version : Writeup: Cleaning your Throttle Body and MAF sensor


Bob98SR5
10-08-2007, 08:44 PM
man, I just dug this up. I was about 90% done with this a year ago! Hope this helps someone :)


http://4runners.org/image/throttle/05_throttle-lever.jpg

http://4runners.org/writeups/throttle/index.html

Bob
humanoid
10-08-2007, 11:44 PM
Nice job as always, Bob!
arjan
10-08-2007, 11:58 PM
Are the years for the MAF sensors correct? My '97 has the maf sensor of which I can't get to the actual sensor (lower one in the write up)
MTL_4runner
10-09-2007, 05:24 AM
Are the years for the MAF sensors correct? My '97 has the maf sensor of which I can't get to the actual sensor (lower one in the write up)


No.

The 96-98 MAFs look like this:

http://4runners.org/image/throttle/03_lower_part.jpg

http://4runners.org/image/throttle/09_99maf.jpg

The 99-02 MAFs look like this:

http://www.4x4wire.com/toyota/maintenance/tacoma_4runner_30k/tight_screwdriver.jpg

http://4runners.org/image/throttle/08_98_maf_wires.jpg




Bob, Arjan is right, I think you got the MAF dates mixed up in the writeup.
Bob98SR5
10-09-2007, 07:33 AM
eeek! thanks guys, its been awhile. ill correct it later tonight
arjan
10-09-2007, 08:16 AM
Damn, I was starting to hope that mine was secretly a '99 and up :D
Bob98SR5
10-11-2007, 10:14 PM
alright guys, i corrected the writeup. thanks for the correction :king:

jamie: i used your image, hope you dont mind
ttora4runner
10-14-2007, 07:48 PM
Going to give this a shot this week. :confused:
MTL_4runner
10-17-2007, 10:03 AM
alright guys, i corrected the writeup. thanks for the correction :king:

jamie: i used your image, hope you dont mind


Bob, that pic is from 4x4 wire so they should get credit for it.
If we need another pic I'm sure someone can snap one of a 99 MAF for you.