Home Alignment Instructions

[elripster]

Hi all. For those that are interested, I updated the alignment instructions on our website.

http://www.sdori.com/SDORI_Alignment.htm

If you have questions post up and I'll try to include them in the instructions.

Frank


[Edit - Good Times - link fixed]

[BruceTS]

http://www.sdori.com/SDORI_Alignment.htm



fixed the link

[AxleIke]

Well, one more time, for me. I've done this twice now, and it's worked amazingly well, except for you're tow-in part.

Let me explain what I do, perhaps my method is off. I tie one end of the string to the mount of my ARB up front, and run it across the direct middle of the front tire (as close as I can), across the middle of the rear tire, and tie it off to my rear spring shackle. Since my front is about 1/2" wider up front than my rear, the only way I can get the string on the rear to sit flat is to toe the tires outward. If I get the fronts just touching, they look splayed outwards.

Perhaps I'm doing this wrong?

[elripster]

The string should not sit flat against the rear tire. My 89 and 94 are both wider up front. With my lift the rear axle is about .75" shifted to the passenger side so it almost sits flush on the driver's rear wheel but not quite.

I'll add a note to the instructions.

Frank

[AxleIke]

Okay, sweet.

Bump for an excellent write up and a way to save yourself a ton of money.