What mod is next for you.

[ttora4runner]

I'm just wondering what you all have in store for modifcations to your vehicles for this upcoming year.

This is what I'm currently looking at:

http://www.sonoransteel.com/Extreme_Duty_Lower_Links.html

[YotaFun]

I will be installing those!
I bought the System 1.51 Lift that came with those.
I would have installed it before the year end, But wouldn't you know it, Practically 3 days after I got it I get broadsided lol!

As for just the lift.
Sliders
Rear Cargo Area Storage Box & Sleeper Platform
Sotashi Mod
Front Mud Flaps
Rhino Line Around fenders and lower quarter of doors.
Locker (may have to regear the front since I want to do 4.56 gears)
Rims & Tries

Other than that, Bumpers wait for the year after since I have two big trips this Summer :-D

[slosurfer]

Body lift
Herculine (of other brand) fenders, part way up the doors, etc..
Install the Stubbs sliders I've had sitting in my garage for over a year :shake:

Adding more lights

[EWAYota]

Debating between 4.88's (E-locker equipped and stock 7.5" IFS) and 5.29's with 35's.
E-locker and something up front.
Possible body lift.
Really want to get my bed bobbed, but will have to deal with addition body work to accomplish it due to crappy bondo job by previous owner.
Possible rear bumper with recovery point.
Really want to get sliderz but I need to decide on the direction I want to take with my truck before I do so.

[YotaGirl]

4Runner: first I need to install the bj spacers I have, then 1" body lift, tub the firewall, trim fenders, 35's and dual cases, possibly new front bumper and skid

Pick up: front and rear bumpers, 37's

I would also like to finally install the rock lights I have for these vehicles. :)

[Seanz0rz]

tundra brake swap
shrockworks bumper (if/when it ever gets here)
finishing up my center console
new sleeping platform (i fell through the last one, doh!)
highlift mount for the surco (im not paying that much money for the surco brand)
fog lights, driving lights, backup lights, rock lights, interior lights.

[ttora4runner]

new sleeping platform (i fell through the last one, doh!)



What happened?

[Seanz0rz]

haha, well, the 1/2 inch plywood i had apparently isnt strong enough to hold me on a very small area at a weak point in my design. this will be fixed on V2. luckily i was at home when i fell through, so i just ended up sleeping on the couch while grandparents occupied my bed during the fires down here in october)

[calrockx]

an oil change.

[Duffil]

currently building a front axle(Shaved, gusseted, MC HD seals, IFS wheel hubs). After that, probably putting in the R151F trans I have laying around and maybe a 4.7 Marlin Crawler Gearset at the same time.

[wifesaysimadumbass]

im just gonna beat the crap out of my rig this year and if it's still in one piece next year well???

[habanero]

Just finished the antenna switch and am doing a kill switch this week.
Will be looking for a job in September...

[ttora4runner]

I guess I need to add this to my list but get the other part of the bud built skid for my 4runner and I'm undecided if I want to lift it at all.

[Ric]

a tire carrier, (I hope) and a new double DIN stereo/nav. unit, or build a laptop mount, so I can use the laptop as a GPS

[cplvc]

Sliders
Front bumper
tires
a-arms
tundra brakes

[neliconcept]

CBI rear bumper and tire carrier which is being built as we speak
ARB or AO roof rack with custom baja light bar.
Custom Turbo setup using my brothers xmas present a garrett S3.
rebuild the rear cargo platform
wet okle seat covers.

small mod of painting the snorkel a graphite grey :)

[jrallan26]

air freshener

[Erich_870]

I'll only include mods I have the parts for and haven't gotten to yet :hillbill:

Taco whip antenna
custom voltmeter
sway bar bushing set
changing to Royal Purple in diffs and transfer case

Erich

[elripster]

Tires, gears, Truetrac LSD.

Frank

[breknraj]

Repair my crossover pipe (for the 3.4)
Re-do the forward section of the exhaust with better support, a flex coupling, and a URD O2 simulator for the rear sensor.
Install my e-locker on the rear, once I get it out of the Taco, and re-gear it.
Zuk rear spring mod.
Figure out how to mod a pair of heated leather Audi seats to fit in the Yota.
New paint, once I've decided which bank to rob! :D

[Vermejo]

4:88's, ARB rd-90, rocker protection, sliders, Bud skids, 35's, 1.5 BL, new windshield and exhaust

[ttora4runner]

What's next $$$$. lol :confused::chair: but it's a surpise.

[neliconcept]

35s in a month or so, pick up my new bumper in a month or so. and figure out rack situation, and i should give up for a while to be honest, i just cant afford to keep adding crap

[4runnerchevy]

Re-do my fuel setup from intake to fuel cell, so I can get rid of these hybrid fuel lines (chevota). More protection against the rollover (maybe outriggers lol). 3rd bucket seat.

[docktortal]

i just did a compustar remote starter on my 99 limited

[04 Rocko Taco]

Sliders and armor for the '84 and a 3" BL for Mall Crawling abilities on the '04

[4LowLocked]

I will be doing the tundra brakes, and the brand new SS 7.2 lift (just released this weekend), and new MT tires

[Intrepidyota]

Let's see...

MC07-R10 (bringing me to about 172:1)
FROR center section for a custom crossmember
Flatbelly
inboarded rear springs
shaved axles
full cage
anti wrap bar

[surf4runner]

remove the running boards for sliders, e-locker and ~1.5"susp lift