View Full Version : 98 taco cd/tape into an 86 runner?
jjrgr21
03-05-2008, 07:44 PM
anyone have an idea on a wiring harness or if it would remotely work. i have the stock cd/tape deck from my 98 taco, and want to put it in my 86 runner.
thanks,
J
corax
03-05-2008, 07:55 PM
as long as you have the connector that plugs into the back of it & you know what color wires go where, it should be no problem
04 Rocko Taco
03-28-2008, 05:30 AM
Any news or updates on your progess jjrgr?
I am looking at doing basically the same thing from my '04 Taco to my '84 Runner and swapping a Scion Tc Radio into my '04
iceman601
03-28-2008, 06:43 AM
You should be good to go when you find the correct adapters. You'll need the aftermarket wire harness that would allow you to connect a aftermarket headunit to your oem plug and the other one which will plug in the factory radio. You can find them all over ebay.
ebay #320040917655 Radio wiring Harness OEM Toyota Scion TC 04 05 06 2006
ebay #320040928355 Radio wiring Harness OEM Toyota Tacoma 00 02 03 04 2000
I've done it a couple of times :hillbill: as I had a couple of factory cd players laying around.
slosurfer
03-29-2008, 07:51 AM
*Chris, side note:
If you press the center button on the Scion decks it changes the audio pattern for the different vehicles.
~Try the XB setting, wider dispersement and bass, great for the 2nd gen 4runner, so should do similar in yours.
Sorry for the slight hijack:
Shane do you have pics of a scion deck in a 2nd gen?
jjrgr21
04-03-2008, 07:42 PM
toyota made a harness up until 2 years ago, but their heard to find now. the colors are different for the 86 harness to current. so it's a no go for me.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.