Winch footprints

[4runnerchevy]

I am in the process of building a front bumper. Its a tube project to match the exo. Have winches gone standard with thier dimensions or all companies different ? I want to leave enough room to add one later. I do not need a bolt pattern, just some examples.

The info I need is

- Actual Width, Height, and Depth of the popular winches ?

- The measurement from the drive end, to the center of drum ?

- I do not need info on winches, or opinions just measurements and possibly pics of thier mounting ?

Any help would be appreciated!
Kevin

[corax]

MileMarker E9000

http://www.milemarker.com/images/electric-dia-9000.jpg

[4runnerchevy]

Thanks Kieth thats some of the info I am looking for. I am looking for a happy medium, so whatever winch gets chosen, its gonna fit the space. I'll make the plate later. I'll continue to search info too.

[slosurfer]

Most wenches I come across seem to be cut from the same mold. 5'10 broad shouldered, pillar shaped, chick mullet, bad attitude, and usually a little goat hair on her chin. I would say Men's size 10 bootprint. :flipoff:

[corax]

Thanks Kieth thats some of the info I am looking for. I am looking for a happy medium, so whatever winch gets chosen, its gonna fit the space. I'll make the plate later. I'll continue to search info too.


Have you thought about going with a hydraulic winch? You already have the pump for it, it's just a trade off of line speed (slightly slower) vs. 100% duty cycle at full pull. I remember reading an article in some magazine where their power steering fluid temps actually dropped during heavy winch usage . . . .

MileMarker 70-52000C 12,000lb hydraulic
http://www.milemarker.com/images/d12-2.jpg

[4runnerchevy]

I have thought of it, it would fit what I do, and an easy upgrade. I have a good spare pump, Just need to concentrate on making space for any winch right now. I so far have been able to muscle and hand winch myself out of anything, but it is on the list down the road.

[corax]

Most manufacturers have these on their site, but for reference, this is easier

Ultimate Performance Series:
Warn 9.5xP
http://www.warn.com/truck/winches/images/450/95xp-dimensions.gif
Warn 9.5ti Thermometric
http://www.warn.com/truck/winches/src/images/55/9.5ti_dimensions.gif

Heavyweight Series:
Warn M12000
http://www.warn.com/truck/winches/src/images/47/M12Line.gif

Premium Series:
Warn xD9000i
http://www.warn.com/truck/winches/src/images/57/XD9iLine.gif
Warn xD9000
http://www.warn.com/truck/winches/src/images/58/XD9Line.gif
Warn M8000
http://www.warn.com/truck/winches/src/images/61/M8Line.gif

** looks like 23" x 8" +/- an inch each way would get you in the ballpark

[4runnerchevy]

Thanks Keith for the info, I pretty much have what I need. I am starting my bumper build today.

[Cebby]

Most manufacturers have these on their site, but for reference, this is easier

Ultimate Performance Series:
Warn 9.5xP
http://www.warn.com/truck/winches/images/450/95xp-dimensions.gif
Warn 9.5ti Thermometric
http://www.warn.com/truck/winches/src/images/55/9.5ti_dimensions.gif


I have one of each of these sitting on my workbench if you need any specific measurements. :)

[corax]

I have one of each of these sitting on my workbench if you need any specific measurements. :)


Do they work? Are you looking to sell either? I'll be out in Butler (north of Pitt) on Tuesday . . . .

[Cebby]

I have one of each of these sitting on my workbench if you need any specific measurements. :)


Do they work? Are you looking to sell either? I'll be out in Butler (north of Pitt) on Tuesday . . . .


Sorry, not for sale. Both brand new - being used for R & D.

[slosurfer]

I have one of each of these sitting on my workbench if you need any specific measurements. :)


Do they work? Are you looking to sell either? I'll be out in Butler (north of Pitt) on Tuesday . . . .


Sorry, not for sale. Both brand new - being used for R & D.


I hope your using them as an engine hoist to get that V8 in your 4runner! :flipoff:

[4runnerchevy]

Most manufacturers have these on their site, but for reference, this is easier

Ultimate Performance Series:
Warn 9.5xP
http://www.warn.com/truck/winches/images/450/95xp-dimensions.gif
Warn 9.5ti Thermometric
http://www.warn.com/truck/winches/src/images/55/9.5ti_dimensions.gif


I have one of each of these sitting on my workbench if you need any specific measurements. :)


Thanks, I got what I need. You can send me one of those for a fit up and a little R&D. :D

[Cebby]

I have one of each of these sitting on my workbench if you need any specific measurements. :)


Do they work? Are you looking to sell either? I'll be out in Butler (north of Pitt) on Tuesday . . . .


Sorry, not for sale. Both brand new - being used for R & D.


I hope your using them as an engine hoist to get that V8 in your 4runner! :flipoff:


You mean it won't work sitting next to the 4Runner?