View Full Version : CYi5's 1999 4Runner
Seeing so many other buildups I thought I'd share mine as well. Chalk me up as another fan of craigslist.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC02861.jpg
Vehicle
1999 Toyota 4runner Limited
3.4L V6 + E-Locker -> 4.30's stock
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0029.jpg
Modifications
Suspension:
Donahoe Racing Extended Coilovers - 2.25"
Camburg Engineering Upper Control Arms
Timbren Front Bumpstops
OME 890 Rear coils + N86C shocks
OME 10mm Trim Packers + Additional stock bumpstop
Sonoran Steel Adjustable Panhard
Airbags
Wheels & Tires:
285/75/16 Nitto Terragrapplers
16x8 4.5BS American Racing Chamber Teflons
Protection:
ARB Tacoma Winch Bullbar (Matching powdercoat)
Performance:
Elbow mod
AirAid MIT
Lighting:
2x Hella 4000 Metal Driving lights - HID 6000K Conversion
Interior:
Pioneer 5900IB Head Unit
Kicker 10" solobaric + Kicker 750w amp
ICOM IC-V8000 Ham Radio
Scanguage II
Exterior:
20% Front Window Tint
Yakima Roof Mounting System
Mods still to add
Stubbs HD-SKO sliders
Winch - Warn M8000 or Summit/T-maxx 9000 + Synthetic Rope
Note: This is a replacement vehicle for my last truck which I put way too much time and effort into. What I did gain from those years of modding was a love of Toyota quality and knowledge of modification.
R.I.P. Duke
http://i39.photobucket.com/albums/e194/CYi5/dunzo-1.jpg
DR Coilovers ~ Camburg UCA's ~ Deaver 10 leaf ~ DR Rear Resi's ~ ARB Bullbar ~ Allpro Rear Wraparound ~ Hella 4000 HID's ~ Off Axis Sliders ~ 255/85/16 Maxxis Bighorns ~ Etc.
Some parts I was able to salvage and swap over to the new rig, namely lights, interior goodies, and coilovers.
From previous experience with my Tacoma, I knew Donahoe Racing coilovers (now icon vehicle dynamics) gave the best all around ride for pretty much all environments. I always said if I were to do it again I would go OME all around, but since I was able to salvage my DR's I threw them on the 4Runner.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0019.jpg
Because they are extended, I needed to pick up some new UCA's too. I never had an issue running my old Camburg UCA's on the Tacoma and spending an extra $300 just wasn't worth it for Total Chaos.
I appreciated the added stability to the front end compared to stock.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0012.jpg
The Timbren bump stops that are added to the lower control arms make the ride night and day. It really softens up the big dips and nosedives when off road. If you can pick up a used set like I did, they are definitely worth it. The $150 retail price tag is a bit steep but I think they are a necessary addition to the front end short of airbumps.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0318.jpg
For the rear I read that if you are going to get OME springs, it is best to match an OME shock to it as well. So far my experience with the 890's has been good paired with the N86C comfort shock. It seems apparent that I will need to upgrade to the 891's (more constant load capability) as I will be adding a drawer system soon. However, they perform well on the street and the dirt, true coil comfort.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0023.jpg
It came installed with airbags from the previous owner and they do a good job of keeping the rear elevated when loaded. I also picked up the Sonoran steel adjustable panhard bar as I wanted to do it right the first time. In hindsight I would have just stayed with the stock bar. The difference when adjusted to the lift height of the 890's (2.5") is maybe 1/4" difference. Certainly not enough to justify the pricetag. Now if I ever upgrade to some Land Cruiser FZJ80 coils, I will be happy I have the ability to adjust. But for now, it just looks burly under there.
As far as communication goes, I ran CB radios for a few years with mixed results. Sometimes it would be nice and crisp and other times it would be crazy feedback. Eventually the guys I go wheeling with and myself switched over to HAM radios. The clarity is awesome and range is even better. I chose the ICOM IC-V8000 as there is a lot of information on it in the desert racing world, plus I got a sweet rebate from the purchase.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0013.jpg
I was really trying not to go ghetto on this rig as it is essentially a weekend wheeler, with 90% of its life on the streets. So in the interest of passenger legroom, I mounted the radio in the DIN slot underneath my head unit. At times it will interfere with my music, while most of the time it works fine. I ran an extension from the back of the HAM underneath the carpet and out an existing slot in the carpet under the passenger seat. This way I just throw on my magnet antenna, route the antenna down the back of the runner and up along the passenger side under the carpets.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0018.jpg
As a fun toy left over from my Tacoma is the ScanGuage II. It's a pretty useful tool for comparing snorkel temps with your buddies or just as a code reader. Every time I hit rough dirt I tend to throw a CEL for an O2 sensor, when I know for a fact that it was replaced just before I purchased it. I can simply reset it with the ScanGuage and I can go on with my life without that pesky light staring at me.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0014.jpg
Because it's a daily driver, I do have some audio equipment in it. If I didn't get a serious price cut from Kicker I probably wouldn't have these goodies, but they are hard to resist. They include the headunit, a 750w amp under the driver's seat, and the 10" solobaric sub in box. I plan to build a drawer system around it this weekend, at which time I can remove the sub while wheeling and place my air compressor in the same cubby hole.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0024.jpg
I had initially planned to run 16x8 Land Cruiser rims, and actually purchased them. While they were being shipped to me, a deal came up on customtacos for 285/75/16 Nitto Terragrapplers mounted on 16x8 American Racing Teflon Chambers. I had always wanted to run these rims since my Tacoma days, and I was also set on Nitto Terragrapplers due to their impressive offroad performance combined with quiet sound levels at highway speeds.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0028-1.jpg
They haven't failed me yet, we'll see how they do in the snow in a few days. The next set will probably be more terragrapplers but in the 265/75 size for a little more power.
Plans always do seem to change. I was dead set on getting a Shrockworks bumper for the front of this rig. The 10 week waiting period was somewhat of a turn off plus the idea of having to cut into my grill to run my Hella 4000's. That's what it takes to get quality I guess, but driving long stretches on the 395 last month made me want to speed up the addition of my lights back onto the rig. I came upon a new in box ARB Tacoma bumper that I was familiar with from having one on my old truck.
As it's pretty much a street queen right now anyways, I decided to have it powder coated to match the rest of the limited package trim.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0016.jpg
The mounting of the ARB on the 4Runner seems way more stout that it was on my 2001 Tacoma. The Tacoma requires an added block to lengthen the frame. This entails bolts going through the already weak framehorns. The 4Runner uses the tow hook bolts as well as a bolt placed through the frame. I feel much more confident winching with the 4Runner when the time comes.
I recently go my lights mounted and wired up as well, I can turn night into day once again. The are Hella 4000 metal driving lights that have been converted to use a 6000k HID kit. If you are interested in doing this conversion it can be seen here (http://"http://ttora.com/forum/showthread.php?t=82281"). This can be done for around $250, a worthy price for what you get.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0015.jpg
I will try to get a night pic up later for you to see the comparisons.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0130.jpg
Johnson Valley, CA
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0349.jpg
Tea Kettle Junction. Death Valley, CA
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0239.jpg
Death Valley, CA
Went up to Big Bear for the day on Monday. Beautiful day full of sledding and back country driving. Visibility dropped significantly coming down the mountain; I'd guess 5-10 ft. on some stretches. Pretty sketchy but a good trip overall.
http://i39.photobucket.com/albums/e194/CYi5/DSC_0073.jpg
http://i39.photobucket.com/albums/e194/CYi5/DSC_0173.jpg
http://i39.photobucket.com/albums/e194/CYi5/DSC_0143.jpg
http://i39.photobucket.com/albums/e194/CYi5/DSC_0186.jpg
Finally got around to taking pictures of projects I've put together lately.
First up, a pretty basic cargo storage platform. I made it wrap around my sub box to keep it low as well as secure it where it sits. I anchored the box down using the stock tie-down locations using the body nuts. It's nice having a wide short cubby as well as a long skinny one.
I initially started building drawers but ditched the idea for lack of sliders as well as tools to make them stout enough. It allows me to carry gear I would normally have in my old truck's toolbox; tow strap, first aid, jumper cables, straps/netting, tool roll, breaker bar, bolt cutters, extra water.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0226.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0235.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0227.jpg
One of the sides was perfect for storing maglights, an otherwise wasted piece of space.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0228.jpg
I relocated the tiedowns to the front of the platform, this holds my military box full of camping stuff, when I go on the next outing i'll update a pic of how it is secured using straps.
It's just tall enough not to block the side cubby from opening.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0233.jpg
I'm really happy how it increases the organized space in the runner and it really helped on hauling snow camping gear for 4 up to Mammoth for a week.
http://i39.photobucket.com/albums/e194/CYi5/4runner/IMG_2320.jpg
I also upgraded the headunit awhile back, simply because I had a hookup and it cost me $40 for the upgrade.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0237.jpg
For those of you who have switched out your headunits, an unfortunate side effect is that your power antenna goes up as soon as your radio powers on, regardless of whether you're in CD/iPod or radio. It really makes me nervous taking a power antenna through low hanging trees, so I wired up an interrupt switch for the antenna. I also don't like having unnecessary drag while driving (slim i know..) and it reduces wear on the antenna motor.
It's a blue/white wire for those looking to do the same on a metra wiring harness. I placed the switch down by my feet in a factory metal plate.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0241.jpg
With the OME 890's and DR's cranked to around 2.25" of lift, the truck sat almost dead level. While this looks and performs great when empty, as soon as I added weight for a trip the rear would sag. To remedy the increase in weight, I would often fill up the airbags a bit and that equals a bouncy ride when wheeling.
To alleviate the stress on the airbags I added a set of 10mm OME trim packers to the rear. This would allow the suspension to compress as normal without hard bottom outs or rubbing. The trim packers optimally should have a stock bumpstop to keep them centered in the spring, something the previous owner ditched when they installed airbags. Thanks to wmflyfisher who donated his stock cones for the project! I had to cut off half of the bump to fit it inside the spring in combination with the airbag.
The stock bump lip plus the 10mm OME ring resulted in 3/4" lift, not bad for $50 in parts & shipping.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0242.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0245.jpg
The running boards went back on due to a move as well as rock protection when I ran the Mojave road. I'm itching to pick up some Stubbs sliders, but just graduating college + wanting to move somewhere internationally is holding it up.
The 60" hi-lift needed a home, so I took a note from Xcmountain80 as well as an article on Yotatech. Using Yakima's Universal Snaparounds, I was able to make a secure mount on my crossbars. 2" long, 5/16" carriage bolts fit the best in the holders. Other random hardware such as nuts, fender washers, and lock washers rounded out the construction. :wrenchin:
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0248.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0251.jpg
The time finally came to deck out the yakima crossbars with offroad goodies that don't belong inside. The heavy items are mounted on 48" crossbars.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0123.jpg
Components: Shovel, 60" Hi-Lift, 39½" x 36" x 2¾" Roof Basket
Utilizing Yakima snaparounds, I mounted the 60" Hi-lift using 5/16" carriage bolts, the square seat fits much better in the snaparounds than the bolts supplied with them. 5/16" fender washers also fit perfectly in the hi-lift grooves preventing any shifting.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0125.jpg
For the shovel, I used snaparounds again for the mounts, fabricated a metal sleeve for the blade to fit in up front, and ended up with a quickfist to hold the handle.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0124.jpg
The roof basket took a little more consideration. I knew i wanted it low to avoid excess drag and tree branch contact. To fit where I needed it it also had to be less than 40"x36". After a little searching online I found a strong candidate. The Rooftop Cargo Rack from www.discountramps.com (http://www.discountramps.com) was perfect! 39½" x 36" x 2¾" and only 14 lbs! With a price of $100 shipped I couldn't pass it up.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0117.jpg
After a little juggling of the crossbars and reversing the front factory bars I was able to get it on. I mounted the basket to the factory bars instead of the yakimas for a few reasons. 1) It would mount lower. 2) It would mount behind the yakima wind fairing. 3) The rack mounts fit the factory curves better. 4) It barely fits between the yakima bars mounted up, i'm talking centimeters!!
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0110.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0116.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0126.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0129.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0130-1.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0131.jpg
Notes about the rack quality. It's capacity is 150lbs, and that is obviously evenly distributed. The crossbars are a little flimsy besides the metal rods that brace the brackets. I almost wish the entire floor was made out of those rods, however that would also increase the weight. I foolishly thought the sides would be laser cut solid pieces, however, they appear to be stamped sheet metal. But really, for $79 and the fact that it fits my needs and dimensions perfectly, this thing is a steal.
DiscountRamps also has stretch nets for baskets for around $15 shipped, I will end up buying one of those eventually to keep my light cargo secure.
Little update on wheels/tires. I decided to switch to a 235/85 tire just for kicks. I've run 255/85's in the past and liked them, so decided to give the 32" version a chance. I was originally going to go with BFG KM2's, but none involved free shipping online so I cruised a bit more.
I ended up with a set of 235/85 Hankook Dynapro MT's. Good reviews everywhere I looked...but these mofos are heavy (45-49lbs.).
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0273.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0282.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0277.jpg
So far i'm happy with the purchase, they do have a hum to them, but not as loud as many other MT's.
Also taking a roadtrip to Colorado shortly, and decided to build an awning. Buying one would be awesome, but spending $250+ for something you'll use a few times a month, if that, doesn't really justify the investment. Soo, I built this system for $30 with most of the materials coming from your local Harbor Freight.
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0264.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/DSC_0271.jpg
Here are some recent photos from a 2 week, 3,700 mile solo trip from northern California, throughout Colorado, and then down to Southern California.:smiley_drive: Was the first really long trip i've taken with the 4Runner since I got it last August. Though a supercharger would be nice in the high elevations in Colorado...
http://i39.photobucket.com/albums/e194/CYi5/IMG_0509.jpg
Bonneville Salt Flats
http://i39.photobucket.com/albums/e194/CYi5/IMG_0540.jpg
Camping just northwest of the flats, testing out the new awning setup.
http://i39.photobucket.com/albums/e194/CYi5/IMG_0543.jpg
Window Sox, brought back from a trip to Australia. They're made for an 01+ CR-V, but I was lucky enough to guesstimate the size correctly. They are great for ventilation and to keep bugs out at night. You can also leave them on all the time, as they're made to provide UV protection when you have babies on board.
http://i39.photobucket.com/albums/e194/CYi5/IMG_0573.jpg
Echo Park, Dinosaur National Monument. Beautiful campground which is a treat to get to! Bring insect repellent!:yikes:
http://i39.photobucket.com/albums/e194/CYi5/IMG_0616.jpg
Hankooks performed awesomely. Not too loud at highway speeds and no noticeable slippage on the gravel. When they say they've incorporated rock ejectors, they mean it...these things huck rocks like crazy. There were some large silt beds to plow through on the way to Toroweap and they performed very well. I'll be adding 1" wheel spacers in the future for a little more stability, however. The 5.25" BS feels a little iffy taking highway speed turns.
http://i39.photobucket.com/albums/e194/CYi5/IMG_0740.jpg
Toroweap, north rim of the Grand Canyon. It's pretty awesome to drive 80 miles offroad and have an isolated campground all to yourself with a view overlooking the Grand Canyon!:wings:
Rest of the pictures (http://"http://picasaweb.google.com/JupiterFolly/ColoradoTrip09#") including Rocky Mountain National Park, Mesa Verde National Park, Telluride, Dinosaur National Monument, Estes Park, Grand Canyon, and Rye Patch Reservoir.
I spent yesterday building a security box for the center console. I wanted to make one for a couple reasons. First, to have lockable storage for when my vehicle is parked at the lake, etc. and is a nice place to leave a wallet/gps/cell phone if they can't be carried on me. Secondly, I wanted a place to legally store a firearm that was easily accessible if need be. When it's all said and done I don't think it is large enough to hold a sidearm, unless I get a snubnose revolver or the like.
I chose to do a combination cam-lock over standard key for ease of access to anyone I trust, leaving another key off the keyring, and the ability to open it without removing keys from the ignition.
Excuse the dark pictures, but you'll get the idea. Black metal box :).
http://i39.photobucket.com/albums/e194/CYi5/IMG_0797.jpg
http://i39.photobucket.com/albums/e194/CYi5/IMG_0798.jpg
http://i39.photobucket.com/albums/e194/CYi5/IMG_0799.jpg
http://i39.photobucket.com/albums/e194/CYi5/IMG_0800.jpg
http://i39.photobucket.com/albums/e194/CYi5/IMG_0802.jpg
http://i39.photobucket.com/albums/e194/CYi5/IMG_0808.jpg
http://i39.photobucket.com/albums/e194/CYi5/IMG_0809.jpg
http://i39.photobucket.com/albums/e194/CYi5/IMG_0810.jpg
If I were to do it again i'd probably just get a keyed cam-lock: 1/3 the price, less clearance needed between box and console lid. The combination is just too cool though.:cool:
Got around to making drawers for my rear cargo storage. Turned out pretty precisely with the help of a table saw. I had to special order some extra long slides but at least they're rated for 100 lbs.
http://i39.photobucket.com/albums/e194/CYi5/4runner/IMG_0846.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/IMG_0845.jpg
There is enough room on the front left corner for a spare quart of oil and on the right 2 maglights in quickfists.
http://i39.photobucket.com/albums/e194/CYi5/4runner/IMG_0849.jpg
Thanks for the comments RMP&O. Here are the final shots of the wheel project and pictures of the 235/85's on 16x8's for those that are interested. It does look a little 'froggy style' or 'hawaiian style' stretched over the rim, but there is still a little sidewall bulge. The tire noise increased slightly (at the same 35 psi), so I may do the chalk test to get the contact patch correct again. The width matches the limited flares perfectly as expected; fingers crossed I won't ever need a new set of rims!! I need to stop spending money on stupid tweaks and use it for gas $$$.
http://i39.photobucket.com/albums/e194/CYi5/4runner/LC%20Wheels/Picture001.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/LC%20Wheels/Picture003.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/LC%20Wheels/Picture009.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/LC%20Wheels/Picture006.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/LC%20Wheels/Picture005.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/LC%20Wheels/Picture010.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/LC%20Wheels/Picture013.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/LC%20Wheels/Picture011.jpg
Spent my day off making a little addition to the ARB. Since removing the limited bumper and associated fog lights I've missed that close up light on the road. I also don't like having a useless switch on my steering column.
I welded up some bolt-on brackets that would hold two rectangular lights. These fit in the openings reserved for hi-lift jacking and the winch clutch.
I originally planned to go with Hella FF75 fogs, but at $100 I didn't see it as worth the investment.
The affordable solution:
55w Pilot Driving Lights (PL-2055C) - $19.99 @ AutoZone
http://www.etrailer.com/mm5/graphics/00000001/bta/lights/pl-1055_dimensions.jpg
http://www.etrailer.com/mm5/graphics/00000001/bta/lights/drive_top.jpghttp://www.etrailer.com/mm5/graphics/00000001/bta/lights/drive_side.jpg
I used these on my last taco as reverse lights and found them to be a great value and perfect fit for the all-pro rear bumper. I tapped into the factory fog light wiring harness to utilize the OEM twist switch. Stock fogs are also 55w, so no need to worry about melting wires or fire hazard.
http://i39.photobucket.com/albums/e194/CYi5/Picture005.jpg
http://i39.photobucket.com/albums/e194/CYi5/Picture009.jpg
http://i39.photobucket.com/albums/e194/CYi5/Picture012.jpg
http://i39.photobucket.com/albums/e194/CYi5/Picture013.jpg
Added bump stops to aid in the harsh bottoming out in the rear.:safari-rig:
Parts list:
Daystar KU09014BK ~$35
2"x5"x3/16" Box ~Free (thanks to left over scrap from red87's bumper)
Misc. Hardware ~$3.00 (M8x1.25 = bolts that thread into stock bumpstop nut)
http://i39.photobucket.com/albums/e194/CYi5/4runner/bumps1.jpg
http://i39.photobucket.com/albums/e194/CYi5/4runner/bumps2.jpg
Demello sliders and limited flares don't mix, fyi. A good amount of the inner plastic molding had to be shaved down, leaving a cavity which would fill with water/dirt. I filled these guys with silicone sealant. The plastic is also white underneath the paint, I was expecting it to be black. I also like to weigh things before they go on my truck...34 lbs. each side.
http://lh3.ggpht.com/_rlmfpXISVMM/S2D8Oboh8NI/AAAAAAAAG7E/XufcIe84atA/s800/Picture%20002.jpg
http://lh5.ggpht.com/_rlmfpXISVMM/S2D8Q1HlcoI/AAAAAAAAG7U/CTNKkxkKHRQ/s800/Picture%20006.jpg
http://lh3.ggpht.com/_rlmfpXISVMM/S2D8R9l_ZPI/AAAAAAAAG7Y/O1BKBM1xp4U/s800/Picture%20008.jpg
http://lh5.ggpht.com/_rlmfpXISVMM/S2D8Slc6ddI/AAAAAAAAG7g/JgG3X0un5ZA/s800/Picture%20010.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.