Scuba's 99 Tacoma

[Scuba]

:clap: About time...:D


Less then a week after I got her...
4xinnovations Sliders...
http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10047.jpg

Cb Antennae :
http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10061.jpg

Cb mounting and Tom Tom One.
http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10106.jpg

Enjoy

[Scuba]

Ok So got a few things done :


Pulled the Add-A-Leafs cause they rode like ass.

http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10720-1.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10721.jpg

Cb Antennae Mount
http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10734.jpg

And De-Chromed the Fenders
http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10809.jpg

Oh, I finally got around to putting my 1 Kicker 10" and 300X1 amp in, Much better :guitar:

And recieved some parts

OME 881's and N91S's, Lockright Rear locker, Toyota mini header conversion, The headers are in, Locker will be in on 5/3, And lift will be done when I get funds for the rear springs..
http://i11.photobucket.com/albums/a168/Sycosurfer150/Truck/SDC10796.jpg

Oh, And heres some non poser shots from Calico a couple weekends back :banger:

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSC_7496.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSC_7650.jpg

[Scuba]

So while I was posting that ^^
I was waiting for the exhaust to cool down so I could finish pulling this..
http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10812.jpg

Initial thoughts, Not really noticeable when turning from a dead stop like a stop sign or something, But going about 40-50 and purposely slightly jerking the wheel back in forth I could deff tell it wasnt there.
I crawled a few malls and drove around town a bit and im gettin used to it.

The drive to work tomorrow is very curvy, So I guess that'll be a good time to get used to it more..

[Scuba]

Today was payday...
So I couldnt help myself.

Hit up ORW cause ive been in need of auto tire deflate thingys, got those.
And I picked up some of these

http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10813.jpg

Took maybe 5 mins to get this done...
http://i11.photobucket.com/albums/a168/Sycosurfer150/SDC10814.jpg

[Scuba]

YEAAAA
http://i11.photobucket.com/albums/a168/Sycosurfer150/Locker2.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/Locker1.jpg

[Scuba]

All-Pro 3" rear springs, U bolt flip kit, Ext brake lines Bilstien 5150 10"ers. OME 881 fronts with N91S's
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN0714.jpg
http://i11.photobucket.com/albums/a168/Sycosurfer150/5150s.jpg


Before:
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN0733.jpg

After:
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN0740.jpg

Underneath :
http://i426.photobucket.com/albums/pp344/TTORADell/Frodo%20bumpstops/P1010015.jpg

This is how she'll flex with still another 1" before bumpstops, Oh lil bit of body damage :
http://i426.photobucket.com/albums/pp344/TTORADell/Frodo%20bumpstops/Frodosbss09.jpg

DELL, If you ever read this THANK YOU !!!!

:bling:

[Scuba]

Got the 33's on a couple weeks back...

This weekend.
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN0755.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN0772.jpg

Last weekend.
http://i11.photobucket.com/albums/a168/Sycosurfer150/1.jpg

My Taco and my dads 99 4Runner.
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN0754.jpg


Oh, 21 MPG Higway, ~~16-17 Mixed. Not bad I say.

Oh, And just did a tuneup : Fuel filter, Air filter, PVC valve and grommet, plugs, Tcase, Trans, And front diff ( rear was done with locker install like 4k ago so not worried about it ) ;
Zerks all around were hit about 2 weeks ago (I think the rear drive shaft needs new U's as well as shaft seals on the slip yoke.)

http://i11.photobucket.com/albums/a168/Sycosurfer150/tuneup.jpg

SOO, Up next.
Budbuilts are my birthday present, Exactly one month from today ill be 19 :D
They'll be on the way soon.
After that im thinking front locker.
Somewhere in between those two will be a bed bob, Cause the bed is just too damn long

Hope you enjoy :)

[Scuba]

Bobbed the bed, Still a work in progress, Ill update more when im done..

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1004.jpg

Yes the frame rails have been cut since this picture.
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1001.jpg

EDIT 9/8/09
Been a while since I finished the bob for the most part.

Bondo before sanding
http://i11.photobucket.com/albums/a168/Sycosurfer150/bondo.jpg

Threw some white primer on it and called it a day
http://i11.photobucket.com/albums/a168/Sycosurfer150/bondo1.jpg
http://i11.photobucket.com/albums/a168/Sycosurfer150/bondo2.jpg

BB TTORA 09
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1099.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSC_4895.jpg

[Scuba]

Made a Tire Carrier :

Nothing special but the materials are :
3/16th's 2x2 angle iron and .095 2x2 square tube
3/16th's plate
3 M12 X 1.5 wheel studs and some wheel locks..

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1162.jpg
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1163.jpg
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1164.jpg

Offset it a bit to counter the taco lean a bit..
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1165.jpg



Went off to BigBear a whole 1 week after BB TTORA
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1175.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1211.jpg

Flexin her out
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1229.jpg
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1230.jpg
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1247.jpg

Me on Gold mountain/ John Bull, Compliments to Troy for the vid :thumbup:
http://www.youtube.com/watch?v=bJvvQqBDcaI

AAANNDD Last week I picked up a TJM T-15
It was basically brand new
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1272.jpg

I'll have another update later this week ;)

[Scuba]

Finally got some underbelly protection courtesy of Skid Row OffRoad
I got the front IFS skid, and the transfer case skid. I passed on the transmission skid that goes from the rear of the front crossmember (under the rack and pinion) to the front of the Tcase Xmember.
Why you ask ?
A: I have a manual transmission, Not an auto with a rock magnet of an ATF fluid pan, so for now Im not too worried about it
B: Short wheel base FTW.

These are about $60 cheaper then BB front, already come powder coated ( IDRC), look just as good as BB's AND have a stock size hole for oil changes
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1306.jpg

Reminds me of some dual case Xmember
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1305.jpg

Before
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1309.jpg

After
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1311.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1316.jpg

1/2" or so there..
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1318.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1319.jpg

Yes I know my sliders need to be repainted :flipoff:
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1322.jpg

:bling:
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN1321.jpg




The check list of future mods is as follows in no particular order
OME 882's
Gears (4.88's, Maybe 5.29's)
Rear Bumper
Rear diff armor
Rock lights
Satoshi
Maybe some lights on the front bumper, IDK what kind
Yellow Top Battery
1" BL
Power mirror swap
Paint ?

[Scuba]

It's been a while...


I'm now on 5.29's and have lockrights front and rear..
http://i11.photobucket.com/albums/a168/Sycosurfer150/frontdiff2.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/rearend.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/rearendpattern.jpg

I'm repping the 4Xinnovations bumper, sans winch for now, but thanks to Pismo Jamboree 09 I have a set of lightforce 170 light's.. Love the lights

http://i11.photobucket.com/albums/a168/Sycosurfer150/P2080023.jpg

It's actually black now, as is the paint on the rear near the bob area.. ( I did the corner blinker mod after this picture was taken)
http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN2124.jpg

http://i11.photobucket.com/albums/a168/Sycosurfer150/DSCN2127.jpg

I made a set of quick disco mud flaps
http://i11.photobucket.com/albums/a168/Sycosurfer150/Truck/DSCN1818.jpg

I got a dynomax muffler installed
http://i11.photobucket.com/albums/a168/Sycosurfer150/IMG_0613.jpg


That's all I can think of for now..
I'm pretty sure I'll be on 35's after these 33's are done..

I'll be doing a 1" BL soon, and am saving for a crawler box..