iceman601
04-09-2009, 08:34 PM
Had some free time and extra parts laying around so I decided to piece this together. The projectors are the E55 bi-xenons, covered with the Minigun/Gatling gun shroud which cost a pretty penny.
Used a heat gun to remove the covers:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra01.jpg
E55 projectors:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra02.jpg
Stock headlight shield removed:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra03.jpg
Test fitting:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra04.jpg
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra05.jpg
Drilled some holes for the screws that hold the projector in place:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra06.jpg
Centered in place using the illustrated red lines as guides:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra12.jpg
Bulb holder with bulbs in place:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra13.jpg
Bolted in:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra14.jpg
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra15.jpg
Minigun/Gatling gun shroud secured to the projector:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra16.jpg
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra17.jpg
Test run:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra18.jpg
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra19.jpg
Sealed and completed:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra20.jpg
Installed:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra21.jpg
Finished:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra22.jpg
Used a heat gun to remove the covers:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra01.jpg
E55 projectors:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra02.jpg
Stock headlight shield removed:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra03.jpg
Test fitting:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra04.jpg
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra05.jpg
Drilled some holes for the screws that hold the projector in place:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra06.jpg
Centered in place using the illustrated red lines as guides:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra12.jpg
Bulb holder with bulbs in place:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra13.jpg
Bolted in:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra14.jpg
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra15.jpg
Minigun/Gatling gun shroud secured to the projector:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra16.jpg
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra17.jpg
Test run:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra18.jpg
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra19.jpg
Sealed and completed:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra20.jpg
Installed:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra21.jpg
Finished:
http://i47.photobucket.com/albums/f154/babyangel47/tundra%20E55/tundra22.jpg