jimbo74
04-12-2007, 04:25 PM
This is my new truck. It is a 22r, g52, 1984, sr5, xcab, 4x4, solid axle, 4.10 gears, RN66, CA emissions
I bought this truck from 8Snaces on MCBB
Needs a lot of work, and TLC. I got it without an engine. It also had a first gen. bed on it. That bed is up for sale, as I will be putting the bobbed first gen. bed off of my 85. The engine it is getting is from my rolled 85 2wd, 22r, ca emissions – the smog setup seems a little bit different, but still falls well within legal requirements. the truck seems to be set up as the older 22r, and my 85 22r has the pear exhaust ports like the 22re
I’m working on getting the engine in now…. It still needs some misc. engine parts like the idler system and such to add power steering, it doesn’t have a/c or a smog pump so that wont be an issue
Got a grill, bumper and grill guard for it, also have headlights, turn signals…
The front crossmember was FUBARed, so I built one, and had a NorcalPR weld it in for me -- THANKS Phil
ALSO A BIG THANKS TO robrub00!!!!
and others from MCBB
http://www.explorerforum.com/photopost/data/3550/Picture_12.jpg
http://www.explorerforum.com/photopost/data/3550/Picture_9.jpg
http://www.explorerforum.com/photopost/data/3591/Picture_210.jpg
http://www.explorerforum.com/photopost/data/3550/Dsc00789.jpg
http://www.explorerforum.com/photopost/data/3579/Picture_8.jpg
http://www.explorerforum.com/photopost/data/3579/Picture_39.jpg
LOOKING FORWARD TO GETTING HER RUNNING!!!! But my busy schedule with work, school, & lack of $ make this difficult :rivers:
Plans are to do a ghetto lift ASAP – but first get it running. rears up front w/ banana shackles, dropped drag link, and the rears from my rolled 2wd in back with longer shackles, possibly the aal and blocks if needed
I bought this truck from 8Snaces on MCBB
Needs a lot of work, and TLC. I got it without an engine. It also had a first gen. bed on it. That bed is up for sale, as I will be putting the bobbed first gen. bed off of my 85. The engine it is getting is from my rolled 85 2wd, 22r, ca emissions – the smog setup seems a little bit different, but still falls well within legal requirements. the truck seems to be set up as the older 22r, and my 85 22r has the pear exhaust ports like the 22re
I’m working on getting the engine in now…. It still needs some misc. engine parts like the idler system and such to add power steering, it doesn’t have a/c or a smog pump so that wont be an issue
Got a grill, bumper and grill guard for it, also have headlights, turn signals…
The front crossmember was FUBARed, so I built one, and had a NorcalPR weld it in for me -- THANKS Phil
ALSO A BIG THANKS TO robrub00!!!!
and others from MCBB
http://www.explorerforum.com/photopost/data/3550/Picture_12.jpg
http://www.explorerforum.com/photopost/data/3550/Picture_9.jpg
http://www.explorerforum.com/photopost/data/3591/Picture_210.jpg
http://www.explorerforum.com/photopost/data/3550/Dsc00789.jpg
http://www.explorerforum.com/photopost/data/3579/Picture_8.jpg
http://www.explorerforum.com/photopost/data/3579/Picture_39.jpg
LOOKING FORWARD TO GETTING HER RUNNING!!!! But my busy schedule with work, school, & lack of $ make this difficult :rivers:
Plans are to do a ghetto lift ASAP – but first get it running. rears up front w/ banana shackles, dropped drag link, and the rears from my rolled 2wd in back with longer shackles, possibly the aal and blocks if needed