Log in

View Full Version : Need some part number help in the A/C Control Assembly.



04 Rocko Taco
03-25-2010, 01:30 PM
2004 Tacoma Double Cab PreRunner.
Need the bulbs from behind the A/C knobs in the "Heater Control Assembly" If you click on the link below, scroll down to the second page, it is those 3 bulbs.
Need a part number, as I dont trust my local Toyota Dealer to get the right part for anything!!!
http://ncttora.com/fsm/2003/Repair_Manual/03tacoma/ac/hca/comp.pdf

MTL_4runner
03-25-2010, 03:23 PM
I came up with a part number of 90010-05126 (should be around $4 each)

04 Rocko Taco
03-25-2010, 04:02 PM
Hey Jamie - can you tell me if those bulbs come with the little plastic cups? It shows them as one peice in the FSM, but the part guy at my dealer said they didn't. But again, I dont trust him....

Seanz0rz
03-25-2010, 04:05 PM
hey chris, i have an extra control unit *somewhere* i know it has the bulbs and they are in working order. want me to ship them to you?

04 Rocko Taco
03-25-2010, 04:59 PM
I may take you up on that Sean... Armed with a part number, Im headed over to Team in the morning to see about this bulb, if it looks like its bad news, I'll get with you.

MTL_4runner
03-25-2010, 05:28 PM
Hey Jamie - can you tell me if those bulbs come with the little plastic cups? It shows them as one peice in the FSM, but the part guy at my dealer said they didn't. But again, I dont trust him....


Looks like it might but very hard to tell (see below, 55900B).
Doesn't call out a seperate part for that but those may also be part of the larger control assy (55910).

04 Rocko Taco
03-25-2010, 06:02 PM
Thanks a lot Jamie!!!
No way a "regular joe" such as myself could get his hands on one of those parts catalogs is there?

fenrisx
03-25-2010, 07:04 PM
The bulbs don't come with the sleeves. My 4Runner uses #74 bulbs behind the A/C controls.

04 Rocko Taco
03-27-2010, 01:07 AM
My Taco uses #74 bulbs in the shifter light in the center console, but the bulbs behind the A/C dont have a base at all like the 74's do, they just have the sealed bulb part, and then the wires go down through the sleeves, and back out and wrap around the sides....

fenrisx
03-27-2010, 01:25 AM
It's a shame they just didn't use the same lights for both 4Runner and Taco.. throughout the same generation.

I found some bulb sleeves for 74's on www.autometer.com (http://www.autometer.com) ... It might be worth a shot checking them for the ones you need. (AutoZone is a dealer for them... 3pack of the 74's are 9.99! More than the lights...)

04 Rocko Taco
03-27-2010, 03:14 PM
Sean... yours is from a 4runner, I assume? I wonder how the sleeves from the runner would translate to the Taco? would save me a ton of headache if they were just interchangeable sleeves, then I would just need a few more #74 bulbs...

any chance you can get a pic of any of your chit Sean?

Seanz0rz
03-27-2010, 06:29 PM
stuff is currently burried in my junk room, and im not taking apart my dash for you. ill look when i get a chance. been super busy with the vw and getting my parents house ready for a new driveway. ill get to it when i can, sorry.

04 Rocko Taco
03-27-2010, 06:44 PM
No problem at all man, take your time!!!