DrBeau
04-18-2007, 08:14 PM
Note: I didn't know if this would be appropriate in the "Computer Help" section, as it's somewhat advanced.
Hi all. I know there are quite a few IT guys on here and I need some help. If you don't know anything about internetwork routing or routers, you may want to just stop now. Here is my quandary:
Here's the network setup:
http://support.siatech.org/temp/net-diagram.jpg
Here's the optimum way for things to run (this is as it runs now):
http://support.siatech.org/temp/optimum.jpg
finally, here are the two scenarios we'd like to work with:
http://support.siatech.org/temp/mpls-down.jpg
and
http://support.siatech.org/temp/t1-down.jpg
Thoughts? We'd like all this changing to be in the fly. I'm looking for a little direction as for what routing protocol to use, etc. Finally, here are some notes:
- I have no way of changing anything withing the MPLS, including the configurations of the routers directly on the MPLS.
- I can change the connecting between Router A and Router B to be a direct connection with a 2 address private network if need be.
- the IPsec VPN is the last route we want to be used for internal traffic for either Router A or Router B's network.
If anyone has ANY direction, please let me know. Even a link to a forum that could help would be great. Again, thanks.
Hi all. I know there are quite a few IT guys on here and I need some help. If you don't know anything about internetwork routing or routers, you may want to just stop now. Here is my quandary:
Here's the network setup:
http://support.siatech.org/temp/net-diagram.jpg
Here's the optimum way for things to run (this is as it runs now):
http://support.siatech.org/temp/optimum.jpg
finally, here are the two scenarios we'd like to work with:
http://support.siatech.org/temp/mpls-down.jpg
and
http://support.siatech.org/temp/t1-down.jpg
Thoughts? We'd like all this changing to be in the fly. I'm looking for a little direction as for what routing protocol to use, etc. Finally, here are some notes:
- I have no way of changing anything withing the MPLS, including the configurations of the routers directly on the MPLS.
- I can change the connecting between Router A and Router B to be a direct connection with a 2 address private network if need be.
- the IPsec VPN is the last route we want to be used for internal traffic for either Router A or Router B's network.
If anyone has ANY direction, please let me know. Even a link to a forum that could help would be great. Again, thanks.