Obi..
04-20-2010, 07:51 PM
*Mods, if this side job stuff takes off do I need a "Vendor Account" for UY??
I'm throwing some stuff online to clearance and also I'm gauging interest here while cleaning up the garage of some unpaid for orders.
*See notes!*
2nd-Gen 4Runner Rear Window TailGate Switch Clearance!
I've a few of the 2nd-Gen 4Runner Rear Window TailGate Switch's left over and am just gonna unload what is left in anticipation for an upcoming project. These are used switches and plugs out of the 93-95 4Runner's, with new factory wires for the harness's. They will work with all years if a minor re-pin procedure is performed.
http://farm5.static.flickr.com/4006/4539804876_9cec582977_b.jpg
http://farm3.static.flickr.com/2763/4539802986_9f6e08973f_o.jpg
If you are unsure on specifics, I am including a picture of the factory tailgate key-harness these are for, and..
"Yes, if I run out, or there is another switch/harness I make you want, I can do them, but the price will be a little more, as the parts cost has gone up since a lot of these rigs have gone to the crusher and it's getting a little hard to find the used stuff."
$20+s/h, insured ship @ current rates if you wish. *Fed-Ex only, sorry but too many issues with Mr. Brown Truck leaving things on people's doorsteps unaccounted for. No exceptions.
*Write-up possibly pending if there's enough interest in this. It will include the model like this one for the tailgate, as well as the model for placing the switch in the overhead (tailgate light and speaker) trim plate.
Also for sale, 1991-1995 Truck and 4Runner Tacoma Style ECT Relocation Switch.
$45+s/h, insured ship @ current rates if you wish. *Fed-Ex only, sorry but too many issues with Mr. Brown Truck leaving things on peoples doorsteps unaccounted for.
*Again, no exceptions with shipping and handling.
ECT originally located (in this reference picture) in either the center spot of the armrest console, or the coin holder spot of the shift console).
http://farm3.static.flickr.com/2772/4539192669_a08b94174a_b.jpg
Relocated using new factory switch, wires and harness.
http://farm5.static.flickr.com/4027/4539812612_918d6e2de7_o.jpg
*No, at this time I am not going to be taking on anymore additional engine swap harness jobs, I'll leave that to the guy's like Larry who do this work all day long and can insure the job's done right the first time and get paid the wage to do it. I will however on a limited basis continue to offer my services for the switches, etc for those interested.
I'm throwing some stuff online to clearance and also I'm gauging interest here while cleaning up the garage of some unpaid for orders.
*See notes!*
2nd-Gen 4Runner Rear Window TailGate Switch Clearance!
I've a few of the 2nd-Gen 4Runner Rear Window TailGate Switch's left over and am just gonna unload what is left in anticipation for an upcoming project. These are used switches and plugs out of the 93-95 4Runner's, with new factory wires for the harness's. They will work with all years if a minor re-pin procedure is performed.
http://farm5.static.flickr.com/4006/4539804876_9cec582977_b.jpg
http://farm3.static.flickr.com/2763/4539802986_9f6e08973f_o.jpg
If you are unsure on specifics, I am including a picture of the factory tailgate key-harness these are for, and..
"Yes, if I run out, or there is another switch/harness I make you want, I can do them, but the price will be a little more, as the parts cost has gone up since a lot of these rigs have gone to the crusher and it's getting a little hard to find the used stuff."
$20+s/h, insured ship @ current rates if you wish. *Fed-Ex only, sorry but too many issues with Mr. Brown Truck leaving things on people's doorsteps unaccounted for. No exceptions.
*Write-up possibly pending if there's enough interest in this. It will include the model like this one for the tailgate, as well as the model for placing the switch in the overhead (tailgate light and speaker) trim plate.
Also for sale, 1991-1995 Truck and 4Runner Tacoma Style ECT Relocation Switch.
$45+s/h, insured ship @ current rates if you wish. *Fed-Ex only, sorry but too many issues with Mr. Brown Truck leaving things on peoples doorsteps unaccounted for.
*Again, no exceptions with shipping and handling.
ECT originally located (in this reference picture) in either the center spot of the armrest console, or the coin holder spot of the shift console).
http://farm3.static.flickr.com/2772/4539192669_a08b94174a_b.jpg
Relocated using new factory switch, wires and harness.
http://farm5.static.flickr.com/4027/4539812612_918d6e2de7_o.jpg
*No, at this time I am not going to be taking on anymore additional engine swap harness jobs, I'll leave that to the guy's like Larry who do this work all day long and can insure the job's done right the first time and get paid the wage to do it. I will however on a limited basis continue to offer my services for the switches, etc for those interested.