View Full Version : Rear bumper replacement
frohbego
07-11-2010, 01:35 PM
I wanted to look into replacing my soon to be rusted out rear bumper (chrome).
Any write ups out there and is this easy to do. Do I need to remove the tow hitch as well?
neliconcept
07-11-2010, 08:49 PM
its relatively easy to do, just a lot of bolts to take off, taking the hitch off would make it easier to get off though. and easier to get to the bolts attached to the body
frohbego
07-11-2010, 09:10 PM
Whats a good site to order the parts from? Looks like its 3 metal bumper parts and i also want to replace the rubber foot step thats on top.
YotaFun
07-11-2010, 09:41 PM
Honestly you don't have to take the hitch off to get to it.
I didn't.
parts.com I think is your best bet for those parts, or eBay.
Your in the neighborhood, I could help you if you'd like,
God only knows how many times I have taken the bumper on and off my truck. I have to do it again to repaint mind and change the side wings.
frohbego
07-12-2010, 06:56 AM
Thanks yotafun. Does the plastic step on the top just snap into place.
YotaFun
07-12-2010, 07:49 AM
I believe it has a few nuts to remove too, I can't remember mines been gone for so long lol!
But its really simple to get it all off.
Seanz0rz
07-12-2010, 08:07 AM
plastic just pulls off
BruceTS
07-12-2010, 02:40 PM
It's a whole process to get the bumper off. Remove the spare tire and then the hitch, it'll make it easier, that's only 4 to 6 bolts from the underside. With a screwdriver you can unclip the plastic shroud from underneath, then unbolt the bumper sides and remove them, once those are done, then you can access the rest of the bolts to take the bumper off.
YotaFun
07-12-2010, 05:48 PM
You guys really had to take your hitch off? I don't remember having to do that....
MTL_4runner
07-13-2010, 03:59 AM
Taking the hitch off does make it easier to get at the bolts underneath.
I'll need torches to get the bolts off mine though, they look like they came up off the ocean floor.
frohbego
07-18-2010, 10:35 PM
if i need to replace any bolts any one know where i can buy them and what size?
YotaFun
07-19-2010, 10:44 AM
I just got them at sears hardware, they had the sizes I needed at the time so.
bamachem
07-28-2010, 08:10 PM
When the hitch and spare are removed (takes 10-min tops for both), it really opens things up and reduces any potential frustrations...
http://4rnr.net/p1010005.jpg
frohbego
07-29-2010, 01:49 PM
What online sites have good prices on the bumper? Gonna order one this weekend.
Thanks
MTL_4runner
08-09-2010, 02:08 PM
What online sites have good prices on the bumper? Gonna order one this weekend.
Thanks
I think you want to mention good value not just lowest price.
Some places sell absolute junk for body parts but the price is right.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.