troyboy162
08-28-2010, 09:09 PM
i got a couple of these from total chaos with my 09 pismo jamboree gift certificate and got to install one tonight.
its pretty straight forward and covered in depth on the web so ill just add what i learned i needed
1. c-clip pliers
2. 6-10ish oz of cv grease (two packages for me = 6 oz)
3. 5" hose clamp from home depot (dont get the 5-7" one. its too big)
the grease was just some stuff they had behind the counter at autozone. its cv grease so its going to be over rated for the stress the inner joint will see. i ended up with 6 oz and i bet it could have held 10 oz completly packed to the brim but 6 should be fine. i know lots of people use 4 oz without issue
the boot itself requires some trimming and the original boot is cut to use its tulip section.
i made a video cause i couldnt find the camera
Total Chaos inner CV boot on stock '96 4runner ADD CV (http://www.youtube.com/watch?v=G96zhH3VPwo#)
its pretty straight forward and covered in depth on the web so ill just add what i learned i needed
1. c-clip pliers
2. 6-10ish oz of cv grease (two packages for me = 6 oz)
3. 5" hose clamp from home depot (dont get the 5-7" one. its too big)
the grease was just some stuff they had behind the counter at autozone. its cv grease so its going to be over rated for the stress the inner joint will see. i ended up with 6 oz and i bet it could have held 10 oz completly packed to the brim but 6 should be fine. i know lots of people use 4 oz without issue
the boot itself requires some trimming and the original boot is cut to use its tulip section.
i made a video cause i couldnt find the camera
Total Chaos inner CV boot on stock '96 4runner ADD CV (http://www.youtube.com/watch?v=G96zhH3VPwo#)