Re-aiming Windshield Squirters?

[Obi..]

2nd-Gen 4Runner/3rd-Gen Pickup Tech..

So, since the last freezer we had here this winter my passenger side squirter got somehow rotated a bit counterclockwise so the squirter's now are doing this..



.
Left Side . . Right Side .

I pulled the hose and the nozzle to clean it all up, put a little bit of tri flow around the metal part of the nozzle where the holes are and used a micro-pliar to try to twist it back into position to no avail..

If you have a quick cure or trick for this let me know, if not no big, I'll just grab a spare from ToyConnection this week.

[slacker]

medical needle works great .. you might need to spray some "viener slider" to loosen up the ball


.

[Obi..]

I'm gonna try to warm it up with a hair dryer and try the pliars and spray along with some #5 sewing or surgery needles. FWIW micro plairs are for surgery, they're the one's they use when stitching up veins and arteries, high grade steel ftw!

[EDIT] The silicone spray was the trick while using the needles and pliars. Sprayed it all down and let it soak in for about 3 minutes, got them evened out and while doing so apparently popped the ball back in (reason again being is the system froze up in the winter). Then all I had to do was hit the squirter to check the evenness and then go back and fiddle a little with the height.