Chaplain
06-20-2011, 07:51 PM
Long story short……..
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/264655_10150207560104754_714089753_6802379_5442035 _n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/265065_10150207560179754_714089753_6802380_6287104 _n.jpg
……. It was time for a prerunner bumper anyway.
Finally made some headway on a new bumper so I thought I would go ahead and start a thread as this bumper gets finished up (suggestions welcomed).
First I need to thank some folks: Yves Braun out of Denver who provided me with the chrome-molly tubing to make it happen. John Cooley of http://www.alumicraft.info/"] (http://"Alumi Craft[/COLOR] in San Diego for use of his radius bender, which made this bumper unique. And mostly Jamie Campbell of http://www.raceco-USA.com"] (http://"RaceCO USA[/COLOR] in Irvine for bringing my vision to reality. Jamie is an artist with a welder; all the gorgeous welds you see are his, the others are mine. :)
Cutting it all off
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/260130_10150207558709754_714089753_6802363_1230011 _n.jpg
I put this cross bar in and notched it to clear the a/c condenser's hardline.
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/265025_10150207559039754_714089753_6802367_6302987 _n.jpg
The beginning of the boxed in uprights.
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/265115_10150207558659754_714089753_6802362_7590172 _n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/251280_10150207559219754_714089753_6802370_4719640 _n.jpg
This was harder then it looked to make the box and the radius tube look like they grew together. The consistent angle of the radius really made things harder.
Jamie making quick work out of the MIG and laying down some art, ya he has worked for Robby Gordon, Cameron Steele, Penhall Fabrication etc. Truly a top-shelf fabricator!!
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254055_10150207559154754_714089753_6802369_497350_ n.jpg
Where I'm at as of today. Just need to make a skid plate and burn some tabs on it to hang the skid and some KC HiLights. Oh and I almost forgot I still need to tie-in the top tube ends back to the frame. What do you think? Ideas to help me finish it up.
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/261445_10150207559409754_714089753_6802373_457718_ n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254190_10150207559694754_714089753_6802377_602317_ n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254015_10150207560024754_714089753_6802378_5917750 _n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/264655_10150207560104754_714089753_6802379_5442035 _n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/265065_10150207560179754_714089753_6802380_6287104 _n.jpg
……. It was time for a prerunner bumper anyway.
Finally made some headway on a new bumper so I thought I would go ahead and start a thread as this bumper gets finished up (suggestions welcomed).
First I need to thank some folks: Yves Braun out of Denver who provided me with the chrome-molly tubing to make it happen. John Cooley of http://www.alumicraft.info/"] (http://"Alumi Craft[/COLOR] in San Diego for use of his radius bender, which made this bumper unique. And mostly Jamie Campbell of http://www.raceco-USA.com"] (http://"RaceCO USA[/COLOR] in Irvine for bringing my vision to reality. Jamie is an artist with a welder; all the gorgeous welds you see are his, the others are mine. :)
Cutting it all off
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/260130_10150207558709754_714089753_6802363_1230011 _n.jpg
I put this cross bar in and notched it to clear the a/c condenser's hardline.
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/265025_10150207559039754_714089753_6802367_6302987 _n.jpg
The beginning of the boxed in uprights.
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/265115_10150207558659754_714089753_6802362_7590172 _n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/251280_10150207559219754_714089753_6802370_4719640 _n.jpg
This was harder then it looked to make the box and the radius tube look like they grew together. The consistent angle of the radius really made things harder.
Jamie making quick work out of the MIG and laying down some art, ya he has worked for Robby Gordon, Cameron Steele, Penhall Fabrication etc. Truly a top-shelf fabricator!!
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254055_10150207559154754_714089753_6802369_497350_ n.jpg
Where I'm at as of today. Just need to make a skid plate and burn some tabs on it to hang the skid and some KC HiLights. Oh and I almost forgot I still need to tie-in the top tube ends back to the frame. What do you think? Ideas to help me finish it up.
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/261445_10150207559409754_714089753_6802373_457718_ n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254190_10150207559694754_714089753_6802377_602317_ n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254015_10150207560024754_714089753_6802378_5917750 _n.jpg