Troy's '96 4runner built for 0-4+ rated trails and Expo
http://i723.photobucket.com/albums/w...psda11ac5e.jpg
1996 4Runner
Engine/Drivetrain:
* stock 3.4L, 230k miles, auto
* 20w50 high millage oil in summer 10w30 in winter
* Napa gold oil filter
* Yukon 4.88 gears with Timken bearings
* Amsoil severe gear 75/90 synthetic oil in diffs and transfer case
* Rear Lockright locker, front ARB locker with mini ARB compressor
Suspension front(~3" lift)
* MCMFab long travel arms
* FOA 2.5 MCM short body 8" travel (15.25" collapsed, 23.25" extended) Valving C.015/R.010 Running Napa PS fluid for G-out resistance.
* Viper 3"x16" 600LBS springs
* stock bump stops
* weld bead behind stock Cam guides
* Sway bar removed
* Total Chaos spindle gusset
* Dirt Designs Shock tower brace.
Quote:
OLD
Suspension front(3" lift):
* Old Man Emu N91S 18.5039 extended 13.189 collapsed
* Old Man Emu 883 coils 590 lbs
*
All-Pro upper control arms
* Sway bar removed
* Energy suspension bushings (install sucks but worth it for blown out bushings)
Suspension rear(~4" lift):
* OME 861 progressive springs
* Daystar bump stops to keep from crushing the shocks
* FOA 2.0" body 12" shocks 2.5" res (collapsed 18.3", extended 30.3") Valving C.015/R.010
* Home built shock mounts.
* Ruff stuff 18 in limit straps to keep from pulling the shocks apart
* Sway bar re-installed to keep from being a slinky
* beefed up links and link mounts
Quote:
OLD
Suspension rear(4" lift):
* Pro Comp ES9000 24.75 in. extended; 14.5 in. collapsed
* OME 861 progressive springs
* Daystar bump stops to keep from crushing the shocks
* Ruff stuff 18 in limit straps to keep from pulling the shocks apart
* sway bar removed (broken)
*
beefed up links and link mounts
Tires:
* GY MTR 35x12.5x15
* cheap steel Procomp type 51 8" (3.75" backspacing)
* Brake calipers ground to fit.
* 1.25" All-Pro spacers in the back
Body/Armor:
* 1" Toytec body lift
* cut and pounded front fender wells
* Stubbs HDSKO sliders
* Rola roof basket
* Banner-Offroad custom bumpers with front and rear winch mounts
* Skid Row skid plate set
* Trail gear pumpkin armor small.
Electrical/Misc
* 80/100 watt headlight bulbs in stock housing
* home rigged upgraded headlight harness. (4crawler design)
* Android BackCountry Navigator
* Magnum 257 10 meter radio, Everhardt TSM4 48" antenna spring mounted
* Kenwood TM-V71A 2m/70cm radio, SBB-7 55"/SBB-1 16.5" antennas
* fire extinguisher hard mounted by passenger seat
* battery quick disconnect
* SmittyBuilt XRC-8 winch with stock synthetic line on Banner-Offroad multimount winch cradle
* Sleeping platform with queen size foam mattress
* spare CV axle and tools
* extended rear diff breather
* 42" Hi-Lift, snatch block and straps
* RydelFab light bars
* Chinese 41.5" Cree bar with visor.
Re: Troy's '96 4runner built for 0-4+ rated trails and Expo
Re: Troy's '96 4runner built for 0-4+ rated trails and Expo
trail list:
cleghorn (before they closed the hard parts)
pilot rock
miller jeep trail
pumkin eater
dishpan springs
john bull
gold mtn
jacoby canyon
pontiac sluice
holcome creek
heartbreak ridge
rattlesnake canyon
motino wash
pure quill mine rd
bull frog
hammer down
crazy 8
on the rocks
cake walk
boulder dash
aftershock (completed in '12)
Tachammer
clawhammer
Odessa Canyon
Duran canyon
Phillips canyon
Wallstreet/bismark connector
Mojave road
white mountain
Pleasant canyon loop
Megal pass
salt tram
Josh trail
pictures stolen from Scuba
http://i11.photobucket.com/albums/a1...1/DSCN1742.jpg
http://i11.photobucket.com/albums/a1...1/DSCN1677.jpg
http://i11.photobucket.com/albums/a1...0/5fdb9d9a.jpg
http://i11.photobucket.com/albums/a1...0/9943f094.jpg
http://i723.photobucket.com/albums/w..._3238225_n.jpg
http://i723.photobucket.com/albums/w...e/P1030463.jpg
http://i723.photobucket.com/albums/w...e/P1030495.jpg
http://i723.photobucket.com/albums/w...o/P1030365.jpg
]
Re: Troy's '96 4runner built for 0-4+ rated trails and Expo
