Printable View
I think I have a better idea now thanks. Pretty sure they're a smaller landscaping spike. I have an interesting idea cooking for this that should work but I have to check a couple of things first.Quote:
Originally Posted by 4x4mike
Will have some progress soon I hope. Haven't had time to really do much except get home, shower, play with the kiddo, and sleep.
I settled on my mounting system and I'm sure it will work and blend with the rest of the design. Tomorrow is the day.
I got 3 mounts done.....
http://tapatalk.imageshack.com/v2/15...9b4110d1eb.jpg
I'm going to do the 4 corner mounts to get the rack mounted but after that I will be doing the other 3 per side. It took me forever to get the angles right and the rack level (or as level as it will get on the 4runner)
Lots of work done today but I made it a short day so I could spend some time with the family
http://tapatalk.imageshack.com/v2/15...98262c0768.jpg
http://tapatalk.imageshack.com/v2/15...1d9648a585.jpg
So the front and rear mounts took a lot of fidgeting to get straight but in the end I ended up making the lower mount off the truck and then tacking the rack to it while it was on the 4runner. The holes match nicely and now I can make the center mounts with very little effort and I can do the front mounts next weekend.
Looks great!
I am liking that you deleted the roof rails. I will likely do the same since mine were bent in the roll.
Thats a great Idea. The stock rails dont distribute the weight very well anyhow. You can sell your stock rack as whole as well. Seems like quite a few 4runners came with the holes but no rack.
Seriously that was the hardest part. I spent 3 hours planning, measuring, and centering the rack deletion....and then that much time again fitting 4 mounts. Now granted there are many ways to skin a pig but I started a few different strategies before settling on what's in the pictures.Quote:
Originally Posted by troyboy162
It's not so much the cutting of angles as it is the constant changing of angles. There is no constant angle across the whole roof. I ended up cutting square ends and then cutting the angle in after a fitting or two.
I don't know how it happened but I cut 4 pieces and they were almost perfect the first time. The rack bolts down for the rear. Now I have to do the fronts. I was going for a sleek type look while still remaining functional and I think I've done fairly well for a first stab at fabricating a large piece. I definitely like working with the 1.5x.5" tubing. It's very strong when rotated on the long side.
http://tapatalk.imageshack.com/v2/15...18cd962574.jpg
http://tapatalk.imageshack.com/v2/15...25f49ac764.jpg
http://tapatalk.imageshack.com/v2/15...7b0f252c3d.jpg
http://tapatalk.imageshack.com/v2/15...4c316b62a1.jpg
Got a little done today. I cut and fit the front feet. I was kind of disappointed that after all the measuring I was off by .25" on. one of the holes I drilled. It still fell within the 1" wide bar but I generally like to have better accuracy than that. Given what I've had to measure accurately some of my holes have been off but most of them drill on target. I played around with the drill press and I found that to get a perfect hole I have to measure a quarter high and an eighth to the left in order for my hole to be perfect. I suppose that's what I get for spending 35 bucks for a drill press lol. It still does help drill holes in steel so it is still worth it.
http://tapatalk.imageshack.com/v2/15...1dab071aa0.jpg
Looking good!