Anyone selling? Asking for my boss's daughter in Denton, TX. Contact me at bobyongkim@gmail.com
Type: Posts; User: Bob98SR5; Keyword(s):
Anyone selling? Asking for my boss's daughter in Denton, TX. Contact me at bobyongkim@gmail.com
Hi team,
I'll be moving out in about 3 weeks. If anyone here in Nor Cal wants to finish this project, please let me know asap @ bobyongkim@gmail.com. I'll give you all the metal and nearly...
FINAL STEPS
Re-install the headlamps by first attach attaching the harnesses and then bolting down the headlamp assemblies. Pro-tip on the driver's side: before completely tightening down the...
AIMING THE HEADLIGHTS
If you followed my very first step above, this should be very easy. Adjusting the nuts are as follows:
Vertical beam adjustment nuts are very easy to access for both sides....
HARNESS ASSEMBLY, WIRE ROUTING, and POS/NEGATIVE WIRING
The harness comes in two parts. Connect them together. It should be very obvious and mechanically the two male/female connectors that adjoin...
INSTALL PROJECTOR BULBS W/ SILICONE GASKET, LOCK RING, AND BUTTERFLY NUT
OK, this is the easiest part but pay attention to which way the fan on the projector bulb is oriented. The fan must be facing...
GLASS REMOVAL AND BUTYL REMOVAL
Pro tip: Clear a large workspace. Sorry no pics for this step.
Begin by unclipping the 4 metal retaining clips with a flat bladed screw driver by gently prying...
REMOVE PARTS FROM GREY HEADLIGHT HOUSING
Again take a photo of the back of the housing so that you have a reference for the orientation of the hoses when you put everything back together.
Begin...
REMOVING REAR BLACK HOUSING
Have your phone’s camera ready to take pics of what you’re removing and especially the height of the threads in relation to the top of the beam adjustment nuts. If you...
SIDE MARKERS REMOVAL
Remove the single Philip head screw at the top of the marker end inside the engine bay. Set aside for now but don’t forget to screw it back in. Pop out by hitting the rear...
I finally got with the times and installed Bi-LED projectors from a company named BX Built. I just purchased the projector kit only, not the ready-to-bolt on kit that seems to be taking the company a...
Utilizing the stock holes, if I use one set it's too high. If I use a bottom set of holes, the bottom of the shelving system hits the horizontal metal. So what I did was drill new holes in the vert...
Here's some shots of the seal sealed drawer and all those darn little rubber nubs that needed to be cut off. I lost count.
Damnit, my whole post got timed out and lost.
Ok so here's the short story:
- I used one of the largest pieces of sheet metal (thinner gauge) as the drawer pan. This required a little...
Mike,
The main goal is to build a lockable cargo box. I do though have an idea/concept of building sliding arms that are welded to the side of box that will serve as the frame for a sleeping...
Holy shizzle! How long did that take, Brian? Excellent work as always.
Ken,
Yup, half fairing, no light. As I understand it, all you need to do is to break up the air flow that goes up and over the fairing. I may clip some large binder clips up there to experiment.
If you're an old fart like me, you might've had either Lincoln Logs and/or Erector Set growing up. This is just like an Erector Set. Just nuts and bolts. So after cutting my vert supports, I...
Looking at other designs and having slept in the back of my 4runner a few times on a wood platform, I know from experience that you don't want to make this box too high else you feel like you're...
The Adrian Steel boxes are widely used by people with cargo vans. They are a US based company in MI, so that's a good thing. The thing I purchased had two types of inserts in the slide out drawers....
Gents,
I've always wanted to build a cargo box to keep things safe and secure when traveling esp with pew pews. Also I've always wanted to build a cargo box that would also be capable of...
Ken,
I haven't worked on the rack since I installed it. Too many other projects. One thing I will say though is that this rack is loud on the highway. I hit 70 mph and this thing whistles. I...
After looking at my truck from behind, I realized that the driver's side brake light is partially obscured by the tire carrier (despite what the mfg says). So for safety's sake, I decided to finally...
Some outdoor shots
Since the holes on the other side are unused (for now at least), I decided to buy some socket bolts to close up the holes and paint them to match.
Oh, I also added some essential trail and...