I couldn't find where I've posted this before but it's a universal mic holder I built to fit my 3rd gen with a 5 speed. I say 5 speed because I use 2 mounting screws from a bezel on the transmission tunnel and an auto might not have them in the same location.
The main reasoning for building this little thing is cleaning up the passenger compartment while traveling. Most everything I have is hard wired and most hard mounted or hidden (GPS, ipod, phone, cb, 2m radio) so there aren't any charging cords messing up the already small space around the driver and passenger. I have a Cobra 75 which is the CB with the guts in the mic. I like this because I don't have a cb taking up room somewhere and it's small and easy to use. The mic is also the speaker so it can't be stuffed in the seat or on the floor. With this mount you can have the display facing you and the cord tucked nicely below. My 2m radio has a very small and light mic as well as a much smaller lightweight cord. As such I have built a lighter duty mount for that mic.
Here is an unpainted heavy mount (for the CB).
Here is a poor picture of it painted. It's twice the thickness of the lightweight holder because the CB head is heavy and the mount would vibrate. There is no problem with that but it bugged me. This heavy version is also my second version and it hugs the console piece tighter so I cut a curve into the arm to keep it from rubbing the plastic.
Side by side of the two. Left side (light weight) only mounts on the left side of the tunnel. Right side (heavy duty) is for the passenger side.