I bought one package of: http://www.amazon.com/Ledcreelight-w...f=pd_sim_hi_75

I wired it into the dome light, but might put a switch between it and the dome light.

Did this today. Hardest bit was getting wire through the side of the rear door. ended up using a piece of string tied to a 3/8" socket extension. Besides the 2 hours getting the wire through the door, the rest took about an hour.

Didn't get pics of the process, but here is the finished product:

Installed:


On in daylight:


On at night:



At one of the points where you can cut the light, the ribbon is broken. as long as it stay in place, it works fine, but if it get bumped it stops sending power to the rest of the strip. I will have to go in and solder that back together this weekend.

I am very pleased. Hopefully it holds up well!