Monstaliner Twist

[4x4mike]

Here is my write up: http://www.ultimateyota.com/showthre...ocker-retrofit

I have ABS but understand your upcoming challenge. I'd stop into a parts store and pick their brain. I assume the ABS/non ABS axle shafts are the same lengths but you need to make sure. I had to replace my axle bearings at one time and it required the replacement of some axle seals, ABS ring and spacers. I didn't get to far online or at the dealer but my local CarQuest was on top of it. They had the diagrams and measurements I was after. Since you have the ABS housing perhaps all you need is the ABS ring pressed onto the shaft. The ring will fit in the housing but you need to make sure the entire thing will fit in the housing.

I thought I had some pictures but all I found was a crappy photobucket video. It shows what is at the end of the shaft, behind the backing plate.

http://s36.photobucket.com/user/meza...07210.mp4.html