I ran my coax behind the tail light and through the grommet. Seems to work well.
I ran my coax behind the tail light and through the grommet. Seems to work well.
-Daniel2000 4Runner Sport | V6 | 5spd | 4x4 | Leather | 265/75-16 BFG AT/KO | OBA | BudBuilt front skid
1990 4Runner SR5 | V6 | Auto | 2wd | 3.90 rear | Cobra CB | 265/65r17 Bridgestone Duelers H/Ts | '08 Tacoma 5 spoke rims | Has an 11:1 crawl ratio! SOLD
Awesome I will get that done in a couple weeks. Didn't realize there was a grommet behind the tail light.Originally Posted by DHC6twinotter
1996 T4R Limited: Stock l E-Locked l 265/70/16 Destination A/T's l Ultra Gauge l Drifter CB Mount l AOF Sliders l Weathertech
My Build Thread
2001 Camry: Stock l DD
1987 T4R: Stock l 31x10.50 Interco Trxus *sold*
I discovered this when I did a trailer harness for lights.
Sent from my SAMSUNG-SM-G870A using Tapatalk
98 3rz 4x4 5spd- Monstalined, 99 Talls, 4.30 E-locker, Extra Lights
In Progress:
Tundra/Rear Disc Brakes w/parking brake
Roof Rack/Rear Ladder
Sliders
1st Gen Rollbar Shelf
Updated
1996 T4R Limited: Stock l E-Locked l 265/70/16 Destination A/T's l Ultra Gauge l Drifter CB Mount l AOF Sliders l Weathertech
My Build Thread
2001 Camry: Stock l DD
1987 T4R: Stock l 31x10.50 Interco Trxus *sold*
Got my Adventure Offroad Fab sliders installed
1996 T4R Limited: Stock l E-Locked l 265/70/16 Destination A/T's l Ultra Gauge l Drifter CB Mount l AOF Sliders l Weathertech
My Build Thread
2001 Camry: Stock l DD
1987 T4R: Stock l 31x10.50 Interco Trxus *sold*
Toytec BOSS Lift installed, sway bars removed.
All packed up
Toytec extended bump stop
Sonoran Steel Adjustable Panhard
Superflex vs stock
Rear is done!
Getting the front done
All done
Time to stretch her out
1996 T4R Limited: Stock l E-Locked l 265/70/16 Destination A/T's l Ultra Gauge l Drifter CB Mount l AOF Sliders l Weathertech
My Build Thread
2001 Camry: Stock l DD
1987 T4R: Stock l 31x10.50 Interco Trxus *sold*
Toytec BOSS Lift installed, sway bars removed.
All packed up
Toytec extended bump stop
Sonoran Steel Adjustable Panhard
Superflex vs stock
Rear is done!
Getting the front done
All done
Time to stretch her out
1996 T4R Limited: Stock l E-Locked l 265/70/16 Destination A/T's l Ultra Gauge l Drifter CB Mount l AOF Sliders l Weathertech
My Build Thread
2001 Camry: Stock l DD
1987 T4R: Stock l 31x10.50 Interco Trxus *sold*
Looking awesome dude!
Good choice on the lift, do you know what tires you will go with yet or are you going to stick with the 31s for a while?
And those sliders are awesome, really need to get myself a set like that again, how much did they run you?
Last edited by YotaFun; 03-13-2016 at 01:05 PM.
Avdian (Avy, Avi, Av, Eddie are some nicknames)
Tess - 97' 4Runner "Project Something Or Another" - No More
Annabelle - 00' 4Runner Limited "The Next Chapter"
Natascha - 99' GTI 2.0 N/A Auto - SOLD!!
Swordfish - 05' Camry 2.4 Auto
Project Fluffy - 93' SC400
Thanks, so far loving the lift. Alignment and tires are going on this week, I am going with 285 KO2's, which I am kind of dreading because I live at 8K feet lol.
The sliders are awesome, the only problem I have is that they hit the body when off-roading which is slightly annoying. They ran me $370 with upgraded paint to bedliner.
1996 T4R Limited: Stock l E-Locked l 265/70/16 Destination A/T's l Ultra Gauge l Drifter CB Mount l AOF Sliders l Weathertech
My Build Thread
2001 Camry: Stock l DD
1987 T4R: Stock l 31x10.50 Interco Trxus *sold*
Looks good.
What part of the body do the sliders hit? On a past vehicle that was really heavy and had long sliders I developed a slight bend in the mounting arms that would allow the slider to hit a body seam under the door. I was able to bend the body seam towards the frame and it gave enough clearance it got rid of the noise. Off the top of my head I can't think of what it looks like under there on the 4Runner but I think it's similar.
Posting Permissions
Reply With Quote
