Yeah, that would be cool. Did you print it on any special type of paper? I'd like it to last for a while...
Oh, and your directions were crystal clear. No issues--flew through it pretty smooth.
Yeah, that would be cool. Did you print it on any special type of paper? I'd like it to last for a while...
Oh, and your directions were crystal clear. No issues--flew through it pretty smooth.
Land Cruiser
Nothing special. I just printed it on an Avery label, adhered it, trimmed it with a razor blade, then sprayed the entire front of the switch with a few coats of clear satin ployurethane. It's held up just fine for years.
Andreas
2001 4Runner SR5 4WD - Dorado Gold - 204,XXX miles<br />2007 Volvo XC 90 AWD V6 - Silver<br />1995 Porsche 993 Carrera - Polar Silver
Anyone have a link to the Andy mod?
02' 4Runner, ARB front & rear, 2. 5" Fox coil overs with reserves, Total Chaos upper and lower control arms, Modified Tundra axles, OME rear coils, RS 9000 outboard mounted shocks,Ham & CB radios, Power Slot brakes, Scratch built bumpers and sliders, KC lights front and rear, remote oil filter, K&N.
Here's the one I wrote based on all the info provided by AwoRS (Andreas) - AndyMod Write-UpOriginally Posted by locked-up
Direct your questions about the write-up to him. He is the creator of the andymod, I just simply wrote a write-up for it.
Guess I need to add one here on UY too...
2002 4Runner Sport 4WD
My 4Runner Profile: Click Me
Rock Slide,
Thank you again for a great job putting that together!
Andreas
2001 4Runner SR5 4WD - Dorado Gold - 204,XXX miles<br />2007 Volvo XC 90 AWD V6 - Silver<br />1995 Porsche 993 Carrera - Polar Silver
It was no problem at all. You did all the hard work. I simply took what you said and put it on paper.Originally Posted by aowRS
2002 4Runner Sport 4WD
My 4Runner Profile: Click Me
Thanks Gentleman, I took the long way around and went into the PC and found the wires that went to the ABS system and placed a switch in line to open the circuit. When I did this I obtained similiar results as you did, but I did not disable the YAW control. When you go around a corner and cause the vehicle to lean over, the opposite brakes apply...and the buzzer goes off. What a pain... in the gravel at high speed.... I generally disconnect the trac sensor relay to prevent this, but the buzzer still sounds. I will try your mod and see if it disables the yaw control, I don't know if it is related to the VSC and ABS...hope so.
Keep up the great work!!
Pete
02' 4Runner, ARB front & rear, 2. 5" Fox coil overs with reserves, Total Chaos upper and lower control arms, Modified Tundra axles, OME rear coils, RS 9000 outboard mounted shocks,Ham & CB radios, Power Slot brakes, Scratch built bumpers and sliders, KC lights front and rear, remote oil filter, K&N.
Pete
glad you made it here. Long traveled 02! Very Nice. Any pics or links for us to look at?
________________________________<br />Eric<br /><br />2006 Tundra D-Cab V8<br /><br />"All that is required for evil to prevail is for good men to do nothing"
Stay tuned, in my dirt floor garage at the moment, rebuilding rear shock mounts...
02' 4Runner, ARB front & rear, 2. 5" Fox coil overs with reserves, Total Chaos upper and lower control arms, Modified Tundra axles, OME rear coils, RS 9000 outboard mounted shocks,Ham & CB radios, Power Slot brakes, Scratch built bumpers and sliders, KC lights front and rear, remote oil filter, K&N.
on the way home tonight i noticed a christmas tree-y dash, guess there's a bad connection somewhere. looks like i have some soldering to do in the morning