OK, Im stumped and going through too many fuses to figure this out. I have some driving lights and would like to have them switchable from accessory and high beam. This way I can have them on when i like and then when the fog lights are on. I have 2 circuits at the moment that work independantly. I have a fuse tap from the high beam to switch then ground to switch and switch to relay. I also have a wire from acc. to switch, using the same ground wire and switch to relay wire. So I have this 3 way switch with 6 pins,,see link and scroll down.
http://www.4x4mods.com/Product/Jeep/...rswitch40.html
So how can I make this work so if i have it flipped up the relay is charged from the high beams and when switched down the relay is charged from the acc. and then when in middle nothing..thanks