Results 1 to 4 of 4

Thread: Resetting the Maintenance Light

  1. #1

    Resetting the Maintenance Light

    By default your maintenance light is programmed to turn on every 5000-7500 miles. If your mechanic/dealer forgot to reset the light refer to the simple instructions below to reset the reminder:

    TSB EL002-03 has these instructions:

    1. Turn ignition switch to "ON" position
    2. Set odometer/trip display to "ODO" mode
    3. Turn ignition switch to "OFF" position
    4. Depress and hold the Trip Meter "RESET" button while turning the ignition switch to the "ON" position
    5. The service maintenance reminder light will:

    i. Illuminate solidly for 3 seconds
    ii. Blink for 2 seconds
    iii. Illuminate solidly for 1 second
    iv. Turn off

    6. Release the Trip Meter "RESET" button
    7. Turn the ignition switch to the "OFF" position
    8. Turn the ignition to the "ON" position and confirm that the service maintenance reminder light goes out.
    Lance
    TLCA Member

    2003 4Runner SR5 4x4 Chaos Edition
    2000 Toyota Landcruiser
    19xx M416 Trailer

    Chaos Edition Profile
    Operation Rebuilding Chaos Edition
    01001001001001110110110100100000011000010010000001 11011101100101011000100111011101101000011001010110 010101101100011001010111001000100001

  2. #2

    Re: Resetting the Maintenance Light

    i love this place, learn something new every day!
    --<br />Serge Alexander<br />Creative Director<br />RPM Foundation ( US )

  3. #3

    Re: Resetting the Maintenance Light

    NIce! This will come in handy one day.
    My signature

  4. #4

    Re: Resetting the Maintenance Light

    Good info. I know this info is a saver, so I will pass it on.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •