The mossy runner buildup.....

[Mossyrocks]

I guess you could say this is phase II. Here is what I have planned for the next couple of months;

Hudlow axle D60 rear (65")- Semi-float 35 spline chromo's, yukon 4.88s, ARB air locker, chevy disc brakes.

Fox 2.0 RR shocks all around. either 14s front and 16s rear or 16s all around.

PSC power steering kit.

Hydro assist and tapped box I got from duby.

Fuel cell and flat belly skid plate.

Tube doors and remove carpet.

Cut off the exo and re-do some things, mainly the roof.

Finally, Hood pins to move the cowl bar down to the hood.


I started on it today, managed to find out the threads are screwed up in the pulley shaft. Since it wouldnt take the bolt I figured I'd tap on the pulley. well it broke the cap off the back of the pump (P.O.S) so that put an end to the day. Also the carpet is completely out but nothing has been done to finish in the floor.

Ill get some pics up when there are some to be taken.

[Cheese]

If you have a PSC pump, you have to tap one hole on the pump.

I will get the PN for the right belt from Goodyear when I take my truck out this afternoon.

Now we need pics!

[Mossyrocks]

I can see it threaded down in the shaft. Looks like the first 2 threads are all kinds of messed up.

Yes I do have the PSC pump, and they better exchange it. Which hole has to be tapped?

and thanks for getting that belt number. Hopefully Ill need the belt...

[Mossyrocks]

The new box is in, and the frame sleeves are fixed .

Fabbed up the steering reservoir bracket. Its amazing the goodies that can fit under the hood with the ABS crap gone.







Removed the spare tire holder, I love the view.... And ripped out the wet, stinky carpet. getting ready for herculiner.







and fixed the pass. door enough to get the glass to go up and down. still gotta get a new mirror though. But here it is ready for the front tube doors to be made.

[Lee]

i cant wait to do this to my truck someday

[amgraham]

Everyone should have leather seats and tube doors . Looking very nice man!

[Mossyrocks]

^^^ and japanese cherrywood trim.... bling bling

[Mossyrocks]

heres the new steering link material. 1.5" .250 wall DOM with ballistic fab inserts.



and here is the finished tie rod and half finished hydro bracket. Still gotta box it in and make it look all fancy.

[Mossyrocks]

here is the tie rod-ram bracket.





And here is the skid/ hydro mount. The ram wouldnt fit behind the TR, or between the TR and axle tube. With the TR in the factory location it wouldnt fit either so here it is.

Still gotta plate the skid but I dont have the material right now.

[Mossyrocks]

Hydro mount is all plated up and finished







The center tube is staggered to keep it from folding back.