-
Re: Lift FAQ for the 4th gen 4runner / 2nd gen Tacoma / 1st Gen FJ Cruiser
Jounce Shocks
Just when you thought 4 standard shocks aren't enough, here's an additional 4 more to compliment what you already have. These shocks will give you the ability to take your vehicle to the next level outside of getting a long travel kit. The key to utilizing the jounce shocks are using them at the last 2-3 inches of suspension travel. These shocks help to control the initial shock load much better compared to stock. It will not bounce back like rubber and keeps the spring from compressing as much thus making it possible for the bounce to return in a controlled fashion.
Manufacturer(s)
Lightracing JounceShock System Part# 25780 (complete), #25762 (front) and #25784 (rear)
Donahoe Racing (utilizes the Lightracing Jounceshock System but revalved to Donahoe's specification)
Donahoe Racing
-
Re: Lift FAQ for the 4th gen 4runner / 2nd gen Tacoma / 1st Gen FJ Cruiser
Body Lift
Body lifts are different from suspension lift in that this technology just separates the body from the frame. This modification is not highly recommended as a primary method of lifting your vehicle. I would highly recommend that you do the suspension lift first prior to attempting the body lift. Since a body lift furthur separates the body from the frame there are some safety concerns so please keep this in mind. Many users perform the body lift to help minimize the rubbing experience even after doing the suspension lift. Currently the maxmimum size you can install for a body lift is 1.5". With the 1.5" body lift, you do not need to make any adjustments to the fuel or steering. Installation takes anywhere from 2-4 hours.
Manufacturer
Roger Brown Body Lift - Available in 1 ~ 1.5" of lift. Highly recommend the heavy duty hardware kit (option add on kit)
Product Review Thread
SR5 4x4 - 1.5" Body Lift
-
-
Re: Suspension and Body Lift FAQ
Heavy Duty Rear Lower Control Arms
ManufacturerDesign
All Pro OffroadAdjustable 1.75" X .281 wall DOM tubing, Johnny Joints
Man-A-Fre1-3/4" x .250" wall DOM tubing, Polyurethane Bushings
[url=http://www.sonoransteel.com]Sonoran SteelRubicon Express Super Flex Joint, 1/4" wall DOM tube
All Pro Offroad
[img width=600]http://www.ultimateyota.com/pichost/tech/allprooffroad_lowerlinks.jpg[/img]
Man A Fre
Sonoran Steel
Heavy Duty Rear Upper Control Arms
ManufacturerDesign
All Pro OffroadAdjustable 1" x .156 wall DOM tubing, Johnny Joints
All Pro Offroad
[img width=600]http://www.ultimateyota.com/pichost/tech/allprooffroad_upperlinks.jpg[/img]
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules