This is my 2nd SAS 4runner project. The first one was sold to fund the move to CO and to star Addicted. This time around I went with another 88' 4runner with a 22RE/5spd instead of the A/T.
So, yesterday I started the SAS. I drove it to the shop, and we immediately started cutting By the end of the day the IFS was out, front springs hung and axle housing was under the rig.
Today I didn't get an early start, but by the end of the day the rear is ready to set the pinion angle. We also moved the front hanger back 1/2" since we had a less than stellar front shackle angle.
Hopefully tomorrow we will have the 37s bolted on, front axle assembled, and everything else mounted making it drivable until next Tuesday. In the meantime I will build the 5.29 3rds and prep the tub for the dual case install.
Here is the rig I am starting with