Crawl Ratio Poll

[MiniSimp]

What is everybody's crawl ratio?

I'm at 84:1 and hopefully getting slower after I buy some Marlin Crawler 4.7:1 gear sets.

To calculate crawl ratio: (1st gear ratio)*(Transfer Case Low Ratio)*(Ring & Pinion Ratio)=Crawl Ratio

Mine is 3.95 x 2.28 x 2.28 x 4.10=84:1

[Cebby]

I think mine *will be* 159:1. I am assembling an A340F auto with duals (4.7's in the rear) and 5.29 gears.

2.804 x 2.28 x 4.7 x 5.29 = 158.95:1

Apparently for an auto trans, this is going to be super low.

[AxleIke]

91:1

30.2 feet per minute @1000 RPM

[neliconcept]

4x4.56x5 = 92:1

[Albuquerque Jim]

4Runner
3.83 (First Gear) x 2.566 (Stock case) x 4.7 (Marlin) x 4.30 (Gears) = 199:1


F-Toy
3.95 (First Gear) x 2.28 (Stock case) x 4.7 (Marlin) x 5.71 (Gears) = 242:1

[paddlenbike]

I lose:
3.83 (first gear) x 2.566 (stock t-case) x 4.10 (rear diff) = Not low enough

[EWAYota]

Stock x Stock x Stock = Stock

[Intrepidyota]

3.95*4.7*5.29= 98.2

I am on 38's and I am fairly happy with this. NE wheeling frequently involves lots of wheel spin. I just got the 5.29's, I was previously on 4.10's which had me at 76.1:1. If I need/want to go lower I will throw in dual cases, but for right now I am happy.

[04 Rocko Taco]

ALL STOCK
(1984 4Runner 5speed, 22R)

3.93 * 2.28 * 4.10 = 36.73

37:1

.....*cries*

[Duffil]

99.69:1