As you have probably already discovered, off roading places heavy abuse on many parts of your truck that don’t get abused when your truck is driven “normally”. One of such part is your stock transfer case mount. This soft rubber and steel block bolts between your transfer case and your transfer case cross member, and has a tendency to do one of two things when you are wheeling your truck. It will either flex far to much letting your shifter hit things in the cab, or even worse, the rubber will rip right in half! So now you’re in the middle of a trail, in the middle of nowhere, with a transmission/transfer case that is just flopping around, now what do you do?

To help you avoid such a situation, 4x Innovations has created the first true super duty transfer case mount for Toyota trucks! In this new mount the soft, weak, stock rubber portion of the mount is replaced with quality Energy Suspension Poly round bushings. These bushings will not split and fail on you, eliminating such worries associated with stock mounts. Your new mount comes with thicker steel plates that are laser cut and CNC formed for the best fit possible. This mount is a direct replacement and even includes all needed hardware. You can even run this mount with after market cross members that reuse the Toyota rubber mount.

As if all that wasn’t enough, there’s another trick feature to this mount. If you need remove your transfer case or transmission you now only need to remove two bolts from the bushings to pull the cross member down, not the 4, hard to get to, bolts that engage in the cross member.

Get the strongest mount available for your rig today for just $85 including black died zinc plating! This mount fits all 79-95 Gear drive transfer cases and 82-95 4 cylinder cross members and the Inchworm Tacoma Lefty Case. To order please either contact us or click over to 4xInnovations.com and use the online shopping options.


Edit, new photos below! 11-16-07