I am running stock birfs for now. I figure with 33's and a selectable locker I will be ok. I do carry 2 spares with me just in case.
I just need to finish up the welding, drilling, and tapping then I can put my ride back together. I ordered and e-locker skid from Sky, and I plan on having 12voltguy build the harness and custom switch panel.
http://www.12voltguy.com/toyelock.htm
I am also going to install my winch....I need to get it all done by X-Mas.
Dont worry Bob, I got the grey RTV
1995 4runner--SAS'd and armored--GONE
1998 4Runner--under construction--GONE
2003 4runner...the new project
Pfff...who needs longfields...
Let me know if you break...
-------------------------
Steve
1993 4runner, SAS, 3.0L, Auto Tranny
2007 4runner, stock. For now.
Got a lot done today. The part I thought would be the hardest was no big deal. Today I had my buddy weld a bead where the long studs go, I filed the down, drilled the holes, and tapped them. I guess I got them pretty straight, because it went together very smooth....
Nevermind the mess I made with the RTV
Now I just need to remember how everything goes back together
1995 4runner--SAS'd and armored--GONE
1998 4Runner--under construction--GONE
2003 4runner...the new project
did you get that elocked 3rd used or new
wondering because of the quad flange thats attached.
very nice work!
The art of design is how you communicate your message to said audience
Looking good Marc. You'll be ready for Trail 13 in no time.........
'95 Runner with some goods<br />'99 Taco with some more goods<br /><br />Surf to Live / Live to Surf
After a lot of hard work, and a lot of filing tonight......
Sky e-locker skid in place
Now I just need to put it all back together
1995 4runner--SAS'd and armored--GONE
1998 4Runner--under construction--GONE
2003 4runner...the new project
Looking good, duder! Gonna be locked and loaded in no time!
CJ <IXOYE><<br /><br />03 Tacoma DC TRD 4wd, bunchamods<br /><br />Avatar artwork courtesy of the one and only 04 Rocko Taco.
I got that same motor guard from Sky. Looks good.
2000 Toyota 4runner with some goodies.
Today I "got er done" With the exception of a stripped steering arm stud and the harness for the electrics my e-locker install is done
I was thinking about getting rid of the brake backing plates, but with no where to run the brake lines, I opted to cut the stiock backing plates (thanks Pirate4x4)
1995 4runner--SAS'd and armored--GONE
1998 4Runner--under construction--GONE
2003 4runner...the new project
Sweet! You're gonna own Sleeping Princess when you come back.
I may have to scout out some tougher trails to keep you interested now...
CJ <IXOYE><<br /><br />03 Tacoma DC TRD 4wd, bunchamods
Posting Permissions
Reply With Quote
