33x1250s and 1" BL

[GSU 4Runner]

Finally got the 33x1250s! I've had the 1" BL on for a while but just wanted to show pics of the new tires and clearance.

[img width=800 height=600]http://i236.photobucket.com/albums/ff108/swood14/DSCF3587.jpg[/img]

[img width=800 height=600]http://i236.photobucket.com/albums/ff108/swood14/DSCF3586.jpg[/img]

[img width=800 height=600]http://i236.photobucket.com/albums/ff108/swood14/DSCF3585.jpg[/img]

[img width=800 height=600]http://i236.photobucket.com/albums/ff108/swood14/DSCF3584.jpg[/img]

[img width=800 height=600]http://i236.photobucket.com/albums/ff108/swood14/DSCF3583.jpg[/img]

Clearance Pics:
[img width=800 height=600]http://i236.photobucket.com/albums/ff108/swood14/DSCF3589.jpg[/img]

[img width=800 height=600]http://i236.photobucket.com/albums/ff108/swood14/DSCF3588.jpg[/img]

The last two pics are at full crank, i know I'm going to have to pound the pinch weld but thats no biggy.

[3rdCoastRunner]

Looks good, I really like the beige/black combo

[mastacox]

They're going to rub on your inside fender if you stuff the suspension at all while turning... I would recommend some liberal hammering, that's what I had to do for my 33x12.50's.

[traben27]

Dang dude you have a lot of rake. Maybe it's time to invest in some ball joint spacers nice truck though, I need to black everything out on mine someday....

[idayota]

yeah, some ball joint spacers will get you a little more height and level the body, but you will still have the rubbing problems on full turn lock and full stuff. masta is right...get liberal with a hammer until nothing rubs. looks good!

[GSU 4Runner]

Thanks guys! and yea I'm gonna start the pounding and maybe some cutting when I get back home from school. Right now I just want the body level, I can deal with the rubbing for a little bit longer since I cut the slash shield back a bit.

[elripster]

I'm clearing those tires with no BL so I think you'll clear with a bit of pounding. I threw up a thread at one point showing what I had to do... I'll try to find it.

Frank

[elripster]

Here it is!

http://www.ultimateyota.com/index.ph...=3876.msg36495

Frank

[GSU 4Runner]

Thanks Frank! Yea a little pounding should work but the trimming seemed easy enough so I think I might just go that way to make it clear. and good idea with the ramps that seems like the smartest and easiest way to do that. Thanks again.

[GSU 4Runner]

After some pounding, BJ spacers, and new shocks I have new pics!