No I am not stuck on the trail or in need of a lift .
If you have a high lift jack and a pair of calipers or you are good with a scale could you please measure the width of the channel down the body of the jack? I am in the process of designing a rather inexpensive jack mount and since I don't have a jack in my possession I thought I would see if you guys could help. If you are not sure what I am talking about I am referring to the long section of the jack with all the holes in it. I need a measurement across the channel where the holes are but not the holes themselves. Not from end to end where it would most likely measure 48". Oh, I do need this from a 48" jack unless a 60" has the same design just longer. Thanks in advance guys.