SAS'd and ready to wheel, roadworthy 2001 Tacoma

[Lee]

NEW PRICE! SCROLL DOWN!

Posting this for a friend. The truck is located in Greeneville, TN.

This truck runs beautifully, Scott is a meticulous and talented mechanic/fabricator and only puts the very best into what he owns.

At 72K miles, it still runs like it's at 7 miles. The body is banged up from wheeling, but the truck is in great shape.

Really recommend people look at this seriously if they want a reliable, roadworthy, well-built wheeling rig.

Scott can be contacted at scott6261@yahoo.com

its time to sell my rig, i dont have time to enjoy it anymore and feel it should be used for
what i built it for and not sitting in my garage. thanks for looking
current milage = 72,551

tammy specs

orig vehicle 2001 toyota tacoma ext cab sr5 4x4 5 speed
2.7l 4cyl 4.30 gearset

history this truck has been over maintained since new, including the use of synthetic fluids in the entire truck.
the only thing left stock in terms of fluids was the coolant. Oil has been changed every 2500 to 3000 miles
and only oem filters used and changed every time. Plugs changed at 25k and at 50k coolant changed at
25 and 50k. Front and rear diff fluid and tranny and transfer fluid changed at 10k intervals.

oem parts
replaced ps pump at 28k if I remember correctly
af sensor b/t 40 and 45k
o2 replaced at 65k

mods and
upgrades front susp 1990 fj62 front axle assy
30 spline longfields inc hub gears
5.29 yukon gear set
lock rite locker
3/8 in pipe cap diff guard
marlin high steer w/ 80 series joints
marlin 5” lift springs and shackles
marlin billet steering arms
new oem calipers, lines and rotors
marlin hd inner seals
oem knuckle parts inc felts seals gaskets ect
1993 reman pickup steering box.
usfh front crossmember
usfh secondary crossmember
usfh front and rear hangers

rear susp 2001 oem 8.4 taco rear axle
5.29 yukon gear set
powertrax no slip locker
budbuilt traction bar
Allpro 4 inch lift springs for 93 to 95 pickup
marlin shackles and hangers
usfh crossmember for shock mounts
disabled brake valve
breather extended into the cab
new oem drums and shoes

transfer Stock 01 transmission
1993 pickup rh drop case
1993 pickup gearbox section
front case = stock 2.28 gears
rear case = marlin 4.7 gears
30 spline input shaft
all new oem bearings in both cases
new gaskets
marlin twin stick shifter kit
marlin mc07 r10 adapter
marlin rf1a r10 adapter
marlin eletric spedo adapter

body frame has been reconditioned 3 times since new
usfh 1/4" sliders
usfh front bumper
usfh1/4" rear bumper
usfh 1/4" front frame plating
marlin shock hoops
5150 shocks front and rear 255/70 valving
usfh bed rack with sircco rack
60 inch hi lift jack
spare driveshaft
cobra cb
rock lights
loads of dents and dings from trails
low profile tool box
35 x 12.5 x 15 cooper stt tires 90% tread left
rerouted stock exhaust
wicked sweet shovel
hand throttle

Asking $10,500

$9,500

New price! $8,500

[img width=800 height=537]http://i102.photobucket.com/albums/m82/swakeman/DSC_0982.jpg[/img]
[img width=800 height=528]http://i102.photobucket.com/albums/m82/swakeman/DSC_0985.jpg[/img]
[img width=800 height=528]http://i102.photobucket.com/albums/m82/swakeman/DSC_0987.jpg[/img]
[img width=800 height=528]http://i102.photobucket.com/albums/m82/swakeman/DSC_0989.jpg[/img]
[img width=800 height=528]http://i102.photobucket.com/albums/m82/swakeman/DSC_0990.jpg[/img]

[Crinale]

damn... i would buy that thing in a heart beat, if i had the money and it was a bit closer... but no way i'd want to deal with legalizing that new of a vehicle in CA anyway... :-/

[Lee]

bump for a new price, $9500

[20005spd]

this makes me sick all you guys had awesome rigs, you sold them all, and his is the last to go. its a dam shame

[Obi..]

^ Rigs come and go, that is the cycle. The best part is you can always build another one, it's half the fun.

[20005spd]

^ Rigs come and go, that is the cycle. The best part is you can always build another one, it's half the fun.

its not just the rig, its that the people behind the rigs got alot of people into the sport in a great way, myself included. its really sad to not have them around with us, espcially now that we wheel more and better trails......sorry offtopic over

[scott6261]

Sorry brian, i do miss wheeling up there, i have a baby on the way so its time to move on for a while, im sure ill build something in the future but for now its just sitting in the garage. it would be better to let it go to someone who needs a built rig to play with.

[bflooks]

and quit your whining, brian. you own one of the rigs now.

[scott6261]

bump

[Lee]

oh hi scott