Slosurfer..I finally found the new topic.....But I could not find a classifieds section. I have an all pro longer upper and lower links that puts the tire in the center of wheel well at static ride height when truck is lifted. 3/4 heims on upper links to adjust pinion angle. Downey coils with polyurethane spacers, modified poly bumpstops mounted on housing with coil inserts. my panhard bar has 3/4 heims both ends. I'd like to sell the housing with this set up as it has the panhard mounts that have been modified. the rearend has shock tabs on the ends of housing tube so that you can run any 2.0 shock on outside of frame -- the rear suspension works so much better this way. You just need to fab an upper shock mount or I can make one at the shop similar to the Tacoma 96-10 2.0 shock set up that gets welded/mounted to outside of frame...send me a personal message if you are interested in this set up...This is a desert racing set up with lots of articulation..Asking $650 (shocks not included in pics, sample pic of shock hoop I can bend up and send you for $100 if buying my parts)................Also,If someone is looking for 5:29 gears, I have R&P for 7.5 front and rear 3rd member complete with 5:29s using Turbo or heavy duty case from back in the 80's...Reason for selling: putting '09 Elocker taco rearend with 2.5" 12 inch stroke Bilstein 9100 coilovers and 2.5 10 inch stroke smooth body shocks.....email me at dezertzoro@gmail.com thanks..Paul...