Ive been meaning to make this post for a while now, as iv had my suspension for almost a year but i just remembered about these pics, and figured i would post em up for all you to enjoy
The Kit was designed and built by Steve Fike, Owner of DIRT Designs Fabrication in Atascadero, CA. He also is the fabricator for Milton's (Cabbage on here) sick Tacoma that they desert race. He is a really good guy, and an amazing fabricator, you need anything built, call this guy
He used roughly the same dimensions as the Total Chaos Kit to retain 4wd using t100 cv's.
first things first, remove the old crap
Look Ma! No wheels!
Testing the geometry for the bottom arm
Beginning the top arm
Upper arm getting built
Testing the camber change through the travel, everything just tacked
Completed product, fully TIG welded, with Fox AirShox installed, and the stock torsion bar acting as helper spring (was necessary to get the ride height i wanted, as AirShox cannot hold a vehicle up near the end of their extension due to their design)
Also at the same time I installed All-Pro 1" longer arms in the rear 5-Link, with Johnny Joints for the lower arms, and heims for the upper links and Panhard.
Removing the stock rear end
Everything Completely Removed
Comparison of the upper links:
And the completed product