On to the roof lights. I decided to put the switch on the inside of the camper, just in case I wanted to turn on the lights when things go bump in the night outside.

This is the reason I hate those quick splice connectors. They cut through the wires which weaken the wire and could eventually break completely.


Properly soldered and self vulcanizing tape protected.


Here's the switch location, well within reach from outside the door.


To get the wiring up to the roof, I took a queue from the way Coleman did it and ran it through the seams of the canvas.



Here's how I mounted and sealed the lights to the roof.


With some scrap steel I had laying around, I made a backing plate to distribute the load of the nut


This is what it looks like on the inside