Likin' the new bumper Brian, Ties nicely now with the front and the slider
Likin' the new bumper Brian, Ties nicely now with the front and the slider
Avdian (Avy, Avi, Av, Eddie are some nicknames)
Tess - 97' 4Runner "Project Something Or Another" - No More
Annabelle - 00' 4Runner Limited "The Next Chapter"
Natascha - 99' GTI 2.0 N/A Auto - SOLD!!
Swordfish - 05' Camry 2.4 Auto
Project Fluffy - 93' SC400
finially got the tailpipe re-routed. originally i wanted the pipe coming out of the muffler, then go upwards over the frame, then coming down out of side of the bumper. but after talking to several shops, there's no space to weld the new tailpipe, the only way is to remove the muffler, bent/fit the new pipe, weld it, then put the muffler and tailpipe back on together. that would cost me around $120+. so i decide to just have the very end part re-routed, $50 out of the door.
94 4Runner, SR5 3.0V6, 4WD, 5spd: SOLD<br />99 4Runner, SR5, 3.4L 4WD, 5spd. full SS 1.2 lift, RedLine Fluids, Marline Shifter seat, BruceTS rear bumper, roof busket, Marlin 1200 Clutch, hitch mount tire carrier, Tundra brakes, Brembo rotors. Stubb's sliders, Lightforce 240, ARB Taco bar, BruceTS rear bumper, stainless steel skid plate. ScanGaugeII, Hankook AT 265/75 LC80 wheels.<br />04 4Runner, V6 SR5 4WD, 3rd Gen. LTD wheels, BFG AT 265/75, FJC coils and silver Bilstein shocks, Scion H/U.
Looks good. You should get some high temp flat black paint and spray that visible exhaust piping. I think it would give it a much cleaner look.
'81 pickup, longbed bobbed short, 35" Yoko's and tons of other goodies. 4.7 gear T-case. NEW: 20r/22r hybrid motor!<br /><br /><br />I done ran into my baby and finally found my old blue jean<br />Well, I could tell that they was mine from the oil and the gasoline
never did post up mine..
The art of design is how you communicate your message to said audience
I've heard that you need to reinforce your frame if you're going to mount a tire carrier. Have you guys needed to do this? If so, did you add C-channel or what?
96 4Runner, 2.7L 4WD<br />"Dependence begets subservience and venality, suffocates the germ of virtue, and prepares fit tools for the designs of ambition. " - Jefferson
reinforcing on a 3rd gen is plating, no need to add c channel since its already boxed.
The art of design is how you communicate your message to said audience
What is 'plating?'
96 4Runner, 2.7L 4WD<br />"Dependence begets subservience and venality, suffocates the germ of virtue, and prepares fit tools for the designs of ambition. " - Jefferson
taking metal cutouts and plating the sides and top by welding to the frame
The art of design is how you communicate your message to said audience
ill update mine
[img width=800 height=450]http://i158.photobucket.com/albums/t107/20005spd/field%20and%20forrest/DSC00473.jpg[/img]
[img width=800 height=450]http://i158.photobucket.com/albums/t107/20005spd/DSC00503.jpg[/img]
[img width=800 height=450]http://i158.photobucket.com/albums/t107/20005spd/DSC00506.jpg[/img]
[img width=800 height=450]http://i158.photobucket.com/albums/t107/20005spd/DSC00505.jpg[/img]
[img width=800 height=450]http://i158.photobucket.com/albums/t107/20005spd/DSC00504.jpg[/img]
1998 4runner SAS<br />1997 Volvo 850<br /><br />www.toyotacrawlers.com
figure i'd throw mine in the mix. just got done today need some smoothing but it'll do
trd supercharger rear elocker 4.30 gears