What mod is next for you.

[ttora4runner]

I'm just wondering what you all have in store for modifcations to your vehicles for this upcoming year.

This is what I'm currently looking at:

http://www.sonoransteel.com/Extreme_...wer_Links.html

[YotaFun]

I will be installing those!
I bought the System 1.51 Lift that came with those.
I would have installed it before the year end, But wouldn't you know it, Practically 3 days after I got it I get broadsided lol!

As for just the lift.
Sliders
Rear Cargo Area Storage Box & Sleeper Platform
Sotashi Mod
Front Mud Flaps
Rhino Line Around fenders and lower quarter of doors.
Locker (may have to regear the front since I want to do 4.56 gears)
Rims & Tries

Other than that, Bumpers wait for the year after since I have two big trips this Summer :-D

[slosurfer]

Body lift
Herculine (of other brand) fenders, part way up the doors, etc..
Install the Stubbs sliders I've had sitting in my garage for over a year

Adding more lights

[EWAYota]

Debating between 4.88's (E-locker equipped and stock 7.5" IFS) and 5.29's with 35's.
E-locker and something up front.
Possible body lift.
Really want to get my bed bobbed, but will have to deal with addition body work to accomplish it due to crappy bondo job by previous owner.
Possible rear bumper with recovery point.
Really want to get sliderz but I need to decide on the direction I want to take with my truck before I do so.

[YotaGirl]

4Runner: first I need to install the bj spacers I have, then 1" body lift, tub the firewall, trim fenders, 35's and dual cases, possibly new front bumper and skid

Pick up: front and rear bumpers, 37's

I would also like to finally install the rock lights I have for these vehicles.

[Seanz0rz]

tundra brake swap
shrockworks bumper (if/when it ever gets here)
finishing up my center console
new sleeping platform (i fell through the last one, doh!)
highlift mount for the surco (im not paying that much money for the surco brand)
fog lights, driving lights, backup lights, rock lights, interior lights.

[ttora4runner]

new sleeping platform (i fell through the last one, doh!)

What happened?

[Seanz0rz]

haha, well, the 1/2 inch plywood i had apparently isnt strong enough to hold me on a very small area at a weak point in my design. this will be fixed on V2. luckily i was at home when i fell through, so i just ended up sleeping on the couch while grandparents occupied my bed during the fires down here in october)

[calrockx]

an oil change.

[Duffil]

currently building a front axle(Shaved, gusseted, MC HD seals, IFS wheel hubs). After that, probably putting in the R151F trans I have laying around and maybe a 4.7 Marlin Crawler Gearset at the same time.