Take Over 2008 @ Rausch Creek Off-road Park

[4X4snowRunner]

Cool...I have OME 882 at front lifted 3.25" and OME 891 at the back lifted 3". I need to change the 5mm spacer to 10mm. I was thinking of bl. Did you adjust anything like radiator and steering shaft?

[corax]

looks like fun . . . this park is about 1.5 hours from where I'll be moving to in a few months . . . anyone gonna be up for fall / winter runs?

[Seanz0rz]

keith is an awesome guy to wheel with, shame hes moving out there!

[YotaFun]

no more power steering?
my rack is making some noise after the takeover, it could just be the bushings but it dosent sound like it. i have a spare rack in my shed with 80k on it for when it goes. after that rack goes the ifs will be removed haha

I have a spare rack too, I just don't have the time to be swapping them out yet.
And since I will have at least one car at my disposal besides Tess for the next three weeks, it can be put on hold.

My first day of wheeling I popped the rear swaybar link plate and I let it hang there didn't stop me and the flex is greater . I dent my exhaust tail pipe. The second day wheeling dent the tail pipe again, it's the Rausch rocks initiation Next time I'm going wheeling I will be more protected.

Hey Brian, It's nice to meet you @ Rausch. I learned more about mod, how manny inches your BL? is your tires rubbing at the back penders?

And Avy, Nice to see you and your 4R. I've been member since Jan.2008 I don't post much. I seen your 4R here before. Did you receive the parts from Steve to get your front level with the rear. I will see you guys next year at Rausch.

HAHA! I just ended up talking my entire rear sway bar off.
I need to put it back on I have too much body roll...
You should have come to Paragon, I dented and had to replace my entire muffler cause of that place...

I ended up getting my parts from Northridge Toyota, and I will be doing the spring next week...
I don't think it will get me too level though lol!

hopefully you and yotafun (forget your real name too sorry ha) will be there next year with lockers and more protection so we can wheel together

I will def have a rear locker, be regeard and running 33's with more protection.
I should be able to run blacks then.
Reds wont happen till I SAS (another story to come in another thread)

You bet I 'll be there ...with lockers, skid plate and diff. armore. How did you fit 34"...do you have suspension lift?

My name is Eric

Yay! I know your name now!!!

i have around 3" up front via tundra springs and about 4.5 in the back with land cruiser coils. the rear coils are a little larger than what people normally use from land cruisers but with all the extra weight i have when loaded for wheelin it looks perfect.

I must have my front installed wrong cause I just don't have that much lift up front, hell, my CV angles look like they are still in the stock location, even before the diff drop...

I want to get adjustable coil overs anyway so I can get a little more flex out of the front...

looks like fun . . . this park is about 1.5 hours from where I'll be moving to in a few months . . . anyone gonna be up for fall / winter runs?

Where In PA are you moving?

[corax]

looks like fun . . . this park is about 1.5 hours from where I'll be moving to in a few months . . . anyone gonna be up for fall / winter runs?

Where In PA are you moving?

Most of my family is in the Allentown area (where I grew up and bought my first 'yota truck) - so probably around there or up into the Poconos a bit

[YotaFun]

looks like fun . . . this park is about 1.5 hours from where I'll be moving to in a few months . . . anyone gonna be up for fall / winter runs?

Where In PA are you moving?

Most of my family is in the Allentown area (where I grew up and bought my first 'yota truck) - so probably around there or up into the Poconos a bit

Sweet!
You will be 45 min away but still close!
I am down in Chadds Ford, Kennett Square Area

[corax]

You should have come to Paragon, I dented and had to replace my entire muffler cause of that place...

A bit off topic, but I thought Paragon was closing or being kicked out of their lease for warehousing or an airport(?)

Sweet!
You will be 45 min away but still close!
I am down in Chadds Ford, Kennett Square Area

ASE Cert Master Tech will wrench for beer . . .

[YotaFun]

A bit off topic, but I thought Paragon was closing or being kicked out of their lease for warehousing or an airport(?)

ASE Cert Master Tech will wrench for beer . . .

Yes, It was the last time I was there before they closed...

I will def be taking you up on that offer.
Cause uh yeah... my truck is in major need of some TLC

[20005spd]

Cool...I have OME 882 at front lifted 3.25" and OME 891 at the back lifted 3". I need to change the 5mm spacer to 10mm. I was thinking of bl. Did you adjust anything like radiator and steering shaft?

only thing i needed for my BL was a steering spacer. if you go 1.5" i think you have to move the radiator. like everyone on here says if you get a body lift get one from 4crawler.com

[20005spd]

when i had stock wheels and no rear sway bar i noticed alot of body roll. once i got different backspacing wheels it felt fine.