Had some free time and extra parts laying around so I decided to piece this together. The projectors are the E55 bi-xenons, covered with the Minigun/Gatling gun shroud which cost a pretty penny.
Used a heat gun to remove the covers:
E55 projectors:
Stock headlight shield removed:
Test fitting:
Drilled some holes for the screws that hold the projector in place:
Centered in place using the illustrated red lines as guides:
Bulb holder with bulbs in place:
Bolted in:
Minigun/Gatling gun shroud secured to the projector:
Test run:
Sealed and completed:
Installed:
Finished: