I'm pretty sure I've seen those on a 3rd gen on the T4R board.. No pic to link though.
I'm pretty sure I've seen those on a 3rd gen on the T4R board.. No pic to link though.
I think these is the oneOriginally Posted by fenrisx
http://www.yotatech.com/f79/pattycak...4runner-98168/
Looks like they fit on his 4runner without spacers according to his writeup. They don't look that bad.
2000 Toyota 4runner with some goodies.
Pretty sure I've seen those Tacoma rims on a 1st gen Tacoma.
This is probably not pertinent info, but I'm running '08 Tacoma rims on my '90 4Runner. They fit fine, although the tires are a bit close to the sway bar links.
Mastacox is running the FJ Cruiser rims on his 3rd gen too, although I'm not sure if he's using wheel spacers.
-Daniel2000 4Runner Sport | V6 | 5spd | 4x4 | Leather | 265/75-16 BFG AT/KO | OBA | BudBuilt front skid
1990 4Runner SR5 | V6 | Auto | 2wd | 3.90 rear | Cobra CB | 265/65r17 Bridgestone Duelers H/Ts | '08 Tacoma 5 spoke rims | Has an 11:1 crawl ratio! SOLD
I have those installed on my 1st Gen taco. They are 2nd gen rims.Originally Posted by ttora4runner
Pretty much all 16" and 17" Taco and 4Runner aluminum rims are interchangeable. They all use the same bolt pattern and lug nuts.
I vote NAY on those 4Runner rims you posted, I never liked them. I vote for the Tacoma rims I quoted. They should be easier to find too.
2012 Tacoma 4x4 6spd TRD, e-locker, LT265/75R16E Michelin LTX A/T2s, Stubbs HD-SKOs
2003 Taco-was K.I.A. 4/31/12-RIP
I agree, I like the Taco ones way better.
[b] -Bekah <br />.=. It's not the fall that hurts, it's that stop at the end .=.
x3Originally Posted by some_odd_girl
-Daniel2000 4Runner Sport | V6 | 5spd | 4x4 | Leather | 265/75-16 BFG AT/KO | OBA | BudBuilt front skid
1990 4Runner SR5 | V6 | Auto | 2wd | 3.90 rear | Cobra CB | 265/65r17 Bridgestone Duelers H/Ts | '08 Tacoma 5 spoke rims | Has an 11:1 crawl ratio! SOLD
You could have always painted the 4Runner rims, which I probably would have done.
But if I had the choice I would go with the Tacoma Rims
Avdian (Avy, Avi, Av, Eddie are some nicknames)
Tess - 97' 4Runner "Project Something Or Another" - No More
Annabelle - 00' 4Runner Limited "The Next Chapter"
Natascha - 99' GTI 2.0 N/A Auto - SOLD!!
Swordfish - 05' Camry 2.4 Auto
Project Fluffy - 93' SC400
That's it..Originally Posted by ttora4runner
Nay to both. Both rims have a 5.25" BS, meaning they will be sucked in on your limited flares. I've had the taco TRD rims on my 4runner before and eventually swapped them out for LC rims.
Don't get me wrong, they look sweet on 3rd gens, they are just set too narrow. The tacos rims will be made into a coffee table.
You'll notice the inset on this last picture. I'm also running 235/85's.
1999 Toyota 4runner Limited 4x4 E-Locker: DR Coilovers ~ Camburg UCA's ~ OME 890+10mm ~ Icon Rear 2.5 Resi's ~ 235/85/16 Hankook Dynapro MT's ~ LC Rims
Wow, this pic really puts that backspacing into perspective. I love those rims too, but that much backspacing doesn't give you much to work with.Originally Posted by CYi5
2001 Toyota 4Runner SR5 4-Dub<br />TRD supercharger, Toytec Coilovers, OME 890's, 285 Duratracs