I'm trying to replace the rear window wiper on my 04 4runner.
Is it just the blade that slides out? or does something unclip?
Its been a while and i did not want to force the blade and break anything.
I'm trying to replace the rear window wiper on my 04 4runner.
Is it just the blade that slides out? or does something unclip?
Its been a while and i did not want to force the blade and break anything.
2002 4Runner SR5 / 3.4V6 / 4WD / 4-Speed Automatic / Sonoran Steel System 7.2 Lift Kit / BFGoodrich Mud-Terrain T/A KM2 Tires 255/85/R16 / Stubbs Welding Standard 1.5" Rock Sliders / ARB Bumper / Safari Snorkel / BudBuilt Front Skid / PIAA 520 SMR 6" Driving Lights / Deckplate Mod / K&N Air Filter / OEM Bug Deflector / Husky Liners / Thule rack / Cobra 75 WX ST / Outdoor Logic Drifter Antenna Mount / Rugged Ridge Hawse Fairlead License Plate <br />Photos & write-ups: http://frohbego.blogspot.com/
You have to take off those two little screws.
The blade has a little bracket that comes off of it then attaches to the arm.
that bracket rests between the blade arm and the little stopper.
be careful not to loose those little screws.
did you pick up your replacement blade from Toyota?
Cause there is no aftermarket support for the rear blade of the 4Runner only the dealers sell it cause stupid toyota had to have a screw in type.
I have been trying to figure a way to modify the arm so I can use just a regualr J hook kind.
Avdian (Avy, Avi, Av, Eddie are some nicknames)
Tess - 97' 4Runner "Project Something Or Another" - No More
Annabelle - 00' 4Runner Limited "The Next Chapter"
Natascha - 99' GTI 2.0 N/A Auto - SOLD!!
Swordfish - 05' Camry 2.4 Auto
Project Fluffy - 93' SC400